-
Notifications
You must be signed in to change notification settings - Fork 83
Alarm Script Recipes
LinkMeter on the RaspberryPi has the ability to fire off user scripts when an alarm goes off. This is in addition to beeping the piezo buzzer. This requires some degree of Linux shell scripting expertise, but using some of these recipes might make things a little easier to understand.
From the LinkMeter configuration website navigate to LinkMeter -> Alarm Scripts. Each script has its own reset / save button! Do not try to edit multiple scripts without saving each in between. The script will only run if the "Execute on alarm" box is checked at the time the alarm goes off (currently ringing alarms have no effect).
First of all, alarm scripts are located in /usr/share/linkmeter/. Do not edit the script named "alarm", as this file will be replaced every time LinkMeter is upgraded and you will lose all changes. Instead, create new files for your scripts. The system first looks for alarm-all, and executes that. If the return value of that script is non-zero, the system looks for a file named alarm-{probeidx}{alarmtype}. For example if the Pit probe high alarm is going off, it will look for alarm-0H. These files can be a shell scripts, lua scripts, or a regular ARM ELF binaries. These recipes can be used for either an alarm-specific or alarm-all file. The files must be executable, i.e. chmod +x or they will not be run.
There are many variables available to use in your scripts. From a command prompt execute lmclient LMCF for a list. In addition, the alarm system adds al_probe, al_type, al_thresh, pn (alarm probe name), pcurr (alarm probe current value) variables. The al_set function can be used to change the value of the current alarm.
#!/bin/sh
# The first line of any shell script must begin with the above #! line
# Comments begin with #
# Silence this alarm
al_set 0
This requires that /etc/msmtprc be configured with the proper email server information. Note that many ISPs will block regular email traffic (on port 25) so you'll probably need to use SMTP over SSL on port 465.
sendmail bmayland@myemail.net << EOF
From: Bryan Mayland <bmayland@myemail.net>
To: Bryan Mayland <bmayland@myemail.net>
Subject: [HM] $pn Alert
Alarm $al_type outside threshold $al_thresh, currently $pcurr.
$pn0: $pcurr0
$pn1: $pcurr1
$pn2: $pcurr2
$pn3: $pcurr3
--
http://your.heatermeter.address/luci/lm/
EOF
SMS relies on going through your cell provider's email to SMS gateway so, again, the /etc/msmtprc must be configured for proper email delivery.
echo "$pn Alert -- $pcurr \($al_type\)" | sendmail 2125551212@messaging.sprintpcs.com
A full list of global SMS gateways can be found at Wikipedia's List of SMS gateways.
| Provider | Address |
|---|---|
| AT&T | phonenumber@txt.att.net |
| Nextel | phonenumber@messaging.nextel.com |
| Sprint | phonenumber@messaging.sprintpcs.com |
| T-Mobile | phonenumber@tmomail.net |
| Verizon | phonenumber@vtext.com |
| Virgin Mobile | phonenumber@vmobl.com |
Often you want to turn off the Pit when your food is done. This is easily done using lmclient to send a command to HeaterMeter to change the setpoint.
# Lower the setpoint to 100
lmclient LMST,sp,100
You can do more complicated setpoint control with a ramp down script.
case $al_thresh in
180) NEWSP=215; NEWAL=190; ;;
190) NEWSP=205; NEWAL=200; ;;
200) NEWSP=100; NEWAL=0; ;;
esac
lmclient LMST,sp,$NEWSP
al_set $NEWAL
10 degrees too much? That's ok you can ramp down one degree for every degree the meat climbs if you like
if [ "$al_thresh" -gt 199 ] ; then
# done
lmclient LMST,sp,100
exit
fi
NEWSP=$((sp-1)
NEWAL=$((al_thresh+1))
lmclient LMST,sp,$NEWSP
al_set $NEWAL
Often you may not want be notified when the alarm happens but some time after it happens. Cron can be used. Note cron only has per-minute resolution so don't try to make things happen every N seconds.
# If no parameter, this is a regular alarm
if [ -z "$1" ] ; then
NOW=`date +%s`
# Set target for 1 hour from now 3600=seconds
WHEN=$((NOW+3600))
TARGET=`date -D "%s" -d $WHEN +"%M %H %d %m"`
echo "$TARGET * /usr/share/linkmeter/alarm-all RING${al_probe}" | crontab -
else
# This is the cron callback
# Don't fire again
crontab -r
# Do whatever you want here, using another recipe
fi
The mail transfer agent "msmtp" must be configured before any of the sendmail (email/SMS) commands will work. Edit /etc/msmtprc with the information appropriate for your mail server
account default
host smtp.gmail.com
port 465
auth on
tls on
tls_certcheck off
tls_starttls off
from yourname@gmail.com
user yourname@gmail.com
password password
account default
host smtp.live.com
port 587
tls on
tls_certcheck off
auth on
from yourname@hotmail.com
user yourname@hotmail.com
password password