Home

This guide provides instructions for configuring Termite to communicate with and control ESPEC chambers equipped with GL, P300, SCP220, and ES102 controllers using an RS-232C serial connection.

ESPEC Web Controller: Modern UI Version

The following list provides ESPEC Web Controller (EWC) operation manuals for ESPEC P300, SCP220, ES102, Qualmark T-series and Watlow F4/T controllers. Select a link below or on the right to view the corresponding manual.

• [EWC v3.3 Manual for F4T] (Under construction...)

ESPEC Web Controller: Version 3.3

The following list provides ESPEC Web Controller (EWC) operation manuals for ESPEC P300, SCP220, ES102, Qualmark T-series and Watlow F4/T controllers. Select a link below or on the right to view the corresponding manual.

• EWC v3.3 Manual for F4T
• EWC v3.3 Manual for P300
• EWC v3.3 Manual for SCP220
• EWC v3.3 Manual for ES102
• EWC v3.3 Manual for F4T with MIMO Monitor
• EWC v3.3 Firmware Upgrade Procedure
• EWC v3.3 Universal Web Kit
• EWC v3.3 Non-ESPEC F4T Setup Guide
• EWC v3.3 Manual for T-series
• EWC v3.3 Initial Setup for T-series
• EWC v3.3 T-series Upgrade Procedrue

Release Notes: Web Controller Software

The following is a list of release notes of ESPEC Web Controller from Version 1.0 to Version 3.2.5. Click the following link (or on the right) to view the release notes.

• Release Notes

Remote Communication

Your chamber can be controlled remotely via serial interface using Termite (a simple RS232 terminal) or TCP/IP using PuTTY SSH or Telnet communication protocol. Select a link below to view the corresponding manual.

• Termite (RS232)
• PuTTY TCP/IP

ChamberConnectLibrary

This library is intended to be used to connect to and control ESPEC North America environmental chambers and controllers that include: ESPEC GL, P300, SCP220, ES102; Watlow F4, F4T. Please refer to the README file on the ChamberConnectLibrary page (at ChamberConnectLibrary) for further details. The following links provide direct access to the support page at ESPEC for the specified controller. The one without the link has been discontinued but Python library support is still available.

GL	ESPEC SCP220
Watlow F4T	Watlow F4
Espec P300	ESPEC ES102