Skip to content

Settings

Jump to bottom
github-actions[bot] edited this page Oct 20, 2026 · 1 revision

Open the Settings tab in the web tool. Settings are saved on the shifter and stay after you unplug it. Installing firmware resets them to the defaults.

Settings need OpenShift. With the stock firmware, install OpenShift first.

The Settings tab

Setting What it does Default
LED colour Colour of the button LEDs and the logo. Pick a preset or type a colour such as #FFB64E, then press Save colour. Warm orange
Logo LED Lights the logo between the High/low and Handbrake buttons. Saved when you flip the switch. Off
Gamma correction Makes dim colours look closer to how they look on a screen. Saved when you flip the switch. Off
White balance Fixes LEDs that look blue or green when they should be white. Press Adjust, move the sliders until the LEDs look white, then press Save white balance. Red 255, green 162, blue 96
High/low button Button: on while you hold it. Toggle: each press switches it on or off, and its LED shows red for off and green for on. Saved when you pick one. Button

Open the web tool

Set up

  1. Install
  2. Calibrate
  3. Settings

Help

Clone this wiki locally