PicoUart v0.8.5

Automated tag release — required software checks and packaging passed.
Hardware qualification is separate; see docs/deployment/releasing.md:

• For rated pico (125 MHz) and pico2 (150 MHz), match packaged SHAs to recorded HIL images
• Optional overclock profiles are selected on-device through the persistent configuration sector and require exact-board HIL qualification
• Some Pico 2 boards may not support 300 MHz reliably; the reduced 280 MHz target still requires exact-board HIL before any stability claim
• This project publishes lab/test artifacts using the unallocated cafe:4010 USB identity
• Attach or link recorded HIL evidence for every claimed board, rate, and workload

What's Changed

• Benchmark testing and HID tidyup by @djwinter29-oss in #74
• fix test failure by @djwinter29-oss in #75
• fix packaging by @djwinter29-oss in #76

Full Changelog: v0.8.1...v0.8.5

PicoUart v0.8.1

Automated tag release — required software checks and packaging passed.
Hardware qualification is separate; see docs/deployment/releasing.md:

• For rated pico (125 MHz) and pico2 (150 MHz), match packaged SHAs to recorded HIL images
• Optional overclock profiles are selected on-device through the persistent configuration sector and require exact-board HIL qualification
• Some Pico 2 boards may not support 300 MHz reliably; the reduced 280 MHz target still requires exact-board HIL before any stability claim
• This project publishes lab/test artifacts using the unallocated cafe:4010 USB identity
• Attach or link recorded HIL evidence for every claimed board, rate, and workload

What's Changed

• fix the release pipeline by @djwinter29-oss in #73

Full Changelog: v0.8.0...v0.8.1

PicoUart v0.8.0

Draft release — complete docs/deployment/releasing.md before publishing:

• Confirm packaged artifact SHAs match the recorded HIL images on the rated pico (125 MHz) and pico2 (150 MHz) builds
• Optional overclock profiles are selected on-device through the persistent configuration sector and require exact-board HIL qualification
• Some Pico 2 boards may not support 300 MHz reliably; the reduced 280 MHz target still requires exact-board HIL before any stability claim
• This project publishes lab/test artifacts using the unallocated cafe:4010 USB identity
• Attach or link a recorded HIL pass covering both rated boards
• Promote from draft only after the promote checklist passes

What's Changed

• Bump actions/upload-artifact from 7.0.1 to 7.0.2 by @dependabot[bot] in #65
• Bump actions/setup-node from 6.5.0 to 7.1.0 by @dependabot[bot] in #64
• Bump actions/setup-dotnet from 5.4.0 to 6.0.0 by @dependabot[bot] in #63
• Bump actions/download-artifact from 8.0.1 to 8.0.2 by @dependabot[bot] in #62
• Update host webpage to support multiple device on the same host by @djwinter29-oss in #67
• add publish by @djwinter29-oss in #68
• Add new action to support deployment by @djwinter29-oss in #69
• Tidy design workflow by @djwinter29-oss in #70
• Firmware tidy up by @djwinter29-oss in #71
• fix a few readme and documentation by @djwinter29-oss in #72

Full Changelog: v0.7.0...v0.8.0

PicoUart v0.7.0

Draft release — complete docs/releasing.md before publishing:

• Confirm packaged artifact SHAs match the recorded HIL images on the rated pico (125 MHz) and pico2 (150 MHz) builds
• Development overclock images are attached alongside them: pico-250mhz (250 MHz) and pico2-280mhz (280 MHz). The promote HIL gate covers the rated images
• Some Pico 2 boards may not support 300 MHz reliably; the reduced 280 MHz target still requires exact-board HIL before any stability claim
• This project publishes lab/test artifacts using the unallocated cafe:4010 USB identity
• Attach or link a recorded HIL pass covering both rated boards
• Promote from draft only after the promote checklist passes

What's Changed

• Fix HIL reporting and rate isolation; document measured performance limits by @djwinter29-oss in #55
• Add .NET host tools, shared dashboard, and HID hardware diagnostics by @djwinter29-oss in #56
• Add standalone browser-only WebHID diagnostics dashboard by @djwinter29-oss in #57
• update description in readme by @djwinter29-oss in #58
• Update documenation by @djwinter29-oss in #59
• fix: stop pinning release clocks in the release guide by @djwinter29-oss in #60
• Update documenation by @djwinter29-oss in #61

Full Changelog: v0.6.0...v0.7.0

PicoUart v0.6.0

Draft release — complete docs/releasing.md before publishing:

• Confirm packaged artifact SHAs match the recorded HIL images on the rated pico (125 MHz) and pico2 (150 MHz) builds
• Development overclock images are attached alongside them: pico-250mhz (250 MHz) and pico2-280mhz (280 MHz). The promote HIL gate covers the rated images
• Some Pico 2 boards may not support 300 MHz reliably; the reduced 280 MHz target still requires exact-board HIL before any stability claim
• This project publishes lab/test artifacts using the unallocated cafe:4010 USB identity
• Attach or link a recorded HIL pass covering both rated boards
• Promote from draft only after the promote checklist passes

What's Changed

• Update setuptools requirement from >=68 to >=84.0.0 in /tools/hil by @dependabot[bot] in #51
• Bump pytest from 8.3.5 to 9.1.1 in /tools/hil by @dependabot[bot] in #50
• Document Cloud Agent install and host-test interpreter by @djwinter29 in #52
• Test/v0.5.0 pico default by @djwinter29-oss in #54

Full Changelog: v0.5.0...v0.6.0

PicoUart v0.5.0

Draft release — complete docs/releasing.md before publishing:

• Confirm packaged artifact SHAs match the recorded HIL images on the rated pico (125 MHz) and pico2 (150 MHz) builds
• Development overclock images are attached alongside them: pico-250mhz (250 MHz) and pico2-300mhz (300 MHz). The promote HIL gate covers the rated images
• This project publishes lab/test artifacts using the unallocated cafe:4010 USB identity
• Attach or link a recorded HIL pass covering both rated boards
• Promote from draft only after the promote checklist passes

What's Changed

• Enhance host app by @djwinter29-oss in #49

Full Changelog: v0.4.0...v0.5.0

PicoUart v0.4.0

Draft release — complete docs/releasing.md before publishing:

• Confirm packaged artifact SHAs match the recorded HIL images on the rated pico (125 MHz) and pico2 (150 MHz) builds
• Development overclock images are attached alongside them: pico-250mhz (250 MHz) and pico2-300mhz (300 MHz). The promote HIL gate covers the rated images
• This project publishes lab/test artifacts using the unallocated cafe:4010 USB identity
• Attach or link a recorded HIL pass covering both rated boards
• Promote from draft only after the promote checklist passes

What's Changed

• Fix/review findings followup by @djwinter29-oss in #45
• fix: address review findings and release Pico 2 at 500 MHz by @djwinter29-oss in #47

Full Changelog: v0.3.0...v0.4.0

PicoUart v0.3.0

Draft release — complete docs/releasing.md before publishing:

• Confirm packaged artifact SHAs match the recorded HIL images on the rated pico (125 MHz) and pico2 (150 MHz) builds
• Development overclock images are attached alongside them: pico-250mhz (250 MHz) and pico2-300mhz (300 MHz). The promote HIL gate covers the rated images
• This project publishes lab/test artifacts using the unallocated cafe:4010 USB identity
• Attach or link a recorded HIL pass covering both rated boards
• Promote from draft only after the promote checklist passes

What's Changed

• Fix/update docs by @djwinter29-oss in #35
• Senior project review by @djwinter29 in #36
• Senior review: score and CONTROL_PENDING fix by @djwinter29-oss in #37
• fix: close control-plane handoff race and deadline expiry by @djwinter29-oss in #38
• Fix/control plane handoff regressions by @djwinter29-oss in #40
• Bump actions/cache from 4.3.0 to 6.1.0 by @dependabot[bot] in #39
• Close control-completion and RX DMA review gaps by @djwinter29 in #41
• Widen PIO RX majority samples and harden TX edges by @djwinter29 in #42
• Add a second PIO TX stop bit and bypass RX input sync by @djwinter29 in #43
• Restore PIO TX to 10-bit 8N1 frames by @djwinter29 in #44

Full Changelog: v0.2.0...v0.3.0

PicoUart v0.2.0

Draft release — complete docs/releasing.md before publishing:

• Confirm packaged artifact SHAs match the recorded HIL images on both pico and pico2
• This project publishes lab/test artifacts using the unallocated cafe:4010 USB identity
• Attach or link a recorded HIL pass covering both boards
• Promote from draft only after the promote checklist passes

What's Changed

• Bump actions/checkout from 4.4.0 to 7.0.1 by @dependabot[bot] in #29
• Bump softprops/action-gh-release from 2.6.2 to 3.0.3 by @dependabot[bot] in #28
• Bump actions/upload-artifact from 4.6.2 to 7.0.1 by @dependabot[bot] in #27
• Bump actions/download-artifact from 4.3.0 to 8.0.1 by @dependabot[bot] in #26
• Bump actions/setup-python from 5.6.0 to 7.0.0 by @dependabot[bot] in #25
• Enable RP2040 USB device enumeration fix to prevent HID/CDC loss on r… by @djwinter29-oss in #30
• fix: force USB disconnect/reconnect at startup for clean host re-enum… by @djwinter29-oss in #31
• USB activity LED blink + relax version constraint for major/minor > 99 by @djwinter29-oss in #32
• fix: preserve manual LED state during USB activity by @djwinter29-oss in #33
• fix: address review edge cases and version warnings by @djwinter29-oss in #34

New Contributors

• @dependabot[bot] made their first contribution in #29

Full Changelog: v0.1.1...v0.2.0

PicoUart v0.1.1

Draft release — complete docs/releasing.md before publishing:

• Confirm packaged artifact SHAs match the recorded HIL images on both pico and pico2
• This project publishes lab/test artifacts using the unallocated cafe:4010 USB identity
• Attach or link a recorded HIL pass covering both boards
• Promote from draft only after the promote checklist passes

What's Changed

• fix: restrict HID fallback empty product string to known interface by @djwinter29-oss in #21
• Address residual senior-review findings on latest main by @djwinter29-oss in #20
• fix: upgrade Pico SDK to 2.3.0 and add DMA claim fault-injection tests by @djwinter29-oss in #22
• fix: reset DMA claim outputs on RX failure; expand cppcheck scan; document new tests by @djwinter29-oss in #23
• Fix/review findings by @djwinter29-oss in #24

Full Changelog: v0.1.0...v0.1.1