Installation

Installation and updating

TL;DR: Felucca 1.6 — your own UI colours from the web editor, a SEQ roll that follows the play position, conditional steps (1:2 … 4:4, FILL), EUCLID, DOUBLE / HALF, a MIDI channel per track, PHASE FOLD, three more drum kits and humanize in the MOD matrix, on top of 1.5.1's SEQ > DETAIL, MIDI Program Change, dotted delay times and REV / ECHO THROW, and 1.5's INSERT effects and MIDI LEARN. Connect your FM-1 to a computer by USB, open the web installer in Chrome or Edge, and press Install; no extra hardware is needed. Installing is at your own risk: M-VAVE's updater or the installer's Return to official V15 takes you back. Coming from 1.1.5.x? Read ⚠ Coming from 1.1.5 first: projects saved by 1.4 or later do not open on 1.1.5.x. Going back from 1.6 to 1.5 or 1.5.1? Read ⚠ New in 1.6 first: a project with conditional steps does not open there. Going back from 1.5.x to 1.4.1? Read ⚠ New in 1.5 first: projects saved by 1.5 do not open on 1.2 to 1.4.1. Want to look around first? Try it in your browser, no FM-1 needed.

Multi-engine synthesizer firmware for the M-VAVE FM-1. Please report what you find in Issues.

• Install: web installer (Chrome or Edge, USB), or tools/fm1_install.py from a terminal
• Try: Felucca in your browser: the same firmware compiled to WebAssembly, with the panel on screen (mouse, touch, computer keyboard, Web MIDI in)
• Editor: web editor; its development has moved to Felucca-WebApp
• Build: BUILDING.md

If an update fails, see Troubleshooting.