Skip to content

XR1710G OpenWrt / iStoreOS Wi-Fi 7 Community Firmware v1.5.0

Latest
Latest

Choose a tag to compare

View all tags
@orangeyoo orangeyoo released this 06 Sep 06:43
· 1 commit to public-first-release since this release
v1.5.0
1fd5539

XR1710G OpenWrt / iStoreOS Wi-Fi 7 Community Firmware v1.5.0

中文

Gemtek XR1710G（Airoha AN7581 + MediaTek MT7996）非官方社区固件。这是基于 v1.4 的小范围修复，没有升级内核、网卡/Wi-Fi 驱动、插件或 U-Boot。

本次更新

  1. 5GHz EHT160 启动修复：改用前台 CAC，规避后台 CAC 找不到临时可用信道时 AP 初始化失败。保留 DFS/雷达检测，升级迁移保留用户的频宽、信道、SSID 和密码；首次默认仍为 channel 36 / EHT80 / 请求 29dBm，不强制把用户选择的 160MHz 改回 80MHz。DFS 检测期间 5GHz 暂时不广播，本次 channel 36 实测约 60 秒。
  2. 修正出厂管理员密码：直接在系统镜像预置公开默认密码 password 的哈希，不再仅依赖首启脚本；保留配置升级不覆盖已有密码。
  3. 交流群提示：修改管理员密码页增加“本固件交流群 1061612207”，含英文翻译，保持 Argon 主题和密码提交逻辑不变。

6GHz 默认仍是 channel 37 / EHT160 / 802.11s 空密钥禁用模板。2.4GHz、10G/PPE/NPU、Full Cone、Docker、iStore、PassWall2、OpenClash及风扇策略沿用 v1.4。

四个文件，用途不要混淆

文件 用途
xr1710g-community-v1.5.0-sysupgrade.itb 唯一系统固件：兼容系统后台升级或 U-Boot 系统刷写入口
xr1710g-wiro-uboot-recovery-v1.0.0-flash-slot.bin 已验证 Wiro U-Boot；仅在“更新 U-Boot / Update U-Boot”入口使用，已有兼容版本不必重刷
SHA256SUMS.txt 系统与 U-Boot 两个文件的完整性校验，不刷入
FLASHING-GUIDE.md 中英文刷机教程，不刷入

已有兼容 U-Boot 不需要再次更新。 同一下载区已附上 Wiro U-Boot v1.0.0 的原始已验证文件；它不是 1.5 系统镜像。其上游署名、许可证及对应源码书面提供承诺见该专页，本次原样附带，不改版本或二进制。

  • 后台：系统 → 备份/升级，上传 sysupgrade ITB。
  • Wiro Recovery：选择“系统固件双清”，先备份。此操作会清除旧配置和 overlay 中的 Docker 等数据。红灯通常闪烁约三分钟，必须等页面 100%、绿灯常亮、系统可访问，不要中途断电。
  • 旧兼容 HTTP U-Boot：Firmware → UBI 2.0 - 439 MiB，使用同一个 sysupgrade ITB。
  • 不要把系统 ITB 上传到 Update U-Boot。
  • 干净安装：管理地址 192.168.50.1，用户名 root，初始密码 password。2.4/5GHz Wi-Fi 初始无密码；6GHz Mesh 空密钥默认关闭。请单独有线连接后立即设置管理员和无线密码。
  • 保留配置升级继续使用原地址和密码。两台干净设备不要同时入网，以免 DHCP/地址冲突。

SHA-256：

ad44bd363957d8b7a893f09fc411a6ce6f0fd4ff2872e0b60f0b1fa11872ea0d  xr1710g-community-v1.5.0-sysupgrade.itb
8f150e5ad4aaedcfae4ed6f705c6bf5e32a2e4fe70802d1cf23bc926544eca1f  xr1710g-wiro-uboot-recovery-v1.0.0-flash-slot.bin

验证与来源

无线修复已在两台 XR1710G 上分别通过 EHT160 无线重载及软件重启验证；1.5 镜像通过完整离线内容、版本、密码和翻译检查。内核、设备树、wpad、mt76/MT7996 等关键二进制与 1.4 逐字节相同。维护者确认后发布；新镜像完整刷后验收尚无记录，不把历史 10G/Mesh 测速当成本版新增结果，也不作所有环境零故障承诺。

源码变更 · 上游署名与许可证。本项目不是 OpenWrt、iStoreOS 或硬件厂商官方发布，各组件继续适用原许可证。

交流群与赞赏

本固件交流群：1061612207

Wiro 交流群二维码

赞赏自愿，不影响下载、使用或开源许可。

赞赏码

English

Unofficial community firmware for Gemtek XR1710G (Airoha AN7581 + MediaTek MT7996).

Changes from v1.4

  1. 5GHz EHT160 startup: use foreground CAC to avoid AP initialization failure when background CAC has no available temporary channel. DFS remains enabled. Migration keeps owner width/channel/SSID/security; the factory setting remains channel 36 / EHT80 / requested 29dBm. Wait for CAC before expecting the AP to broadcast (approximately 60 seconds on channel 36 in our test).
  2. Factory login: seed the hash for the public default administrator password password directly in the image. Preserved upgrades retain the existing password.
  3. Password-page notice: add “Firmware community QQ group: 1061612207” with Chinese translation; no change to Argon styling or password submission.

No kernel, Ethernet/Wi-Fi driver, plugin or U-Boot upgrade. The 2.4GHz/6GHz settings, 10G/PPE/NPU, Docker, iStore, Full Cone, PassWall2, OpenClash and fan policies retain the v1.4 baseline. The 6GHz template remains channel 37 / EHT160 / 802.11s, disabled with an empty key.

Download and flash

Four files are provided: sysupgrade ITB (system firmware), xr1710g-wiro-uboot-recovery-v1.0.0-flash-slot.bin (optional U-Boot, only for Update U-Boot), SHA256SUMS.txt (checksums for both binaries), and FLASHING-GUIDE.md (bilingual instructions). GitHub's source archives are not flashable firmware.

Use System → Backup / Flash Firmware, Wiro Recovery System Firmware Double-Clean, or compatible legacy HTTP U-Boot Firmware → UBI 2.0 - 439 MiB. Never upload a system ITB to Update U-Boot. Existing compatible U-Boot does not need reflashing; Wiro U-Boot v1.0.0 is also attached here unchanged. Its version remains v1.0.0; upstream attribution, licenses and the written corresponding-source offer remain available on that dedicated release page.

Double-clean erases old configuration and overlay data. Back up first; wait for 100%, a solid green LED and a reachable system. The red LED commonly blinks for about three minutes. Never interrupt power.

Clean login: 192.168.50.1 / root / password. Initial 2.4/5GHz networks are open; the empty-key 6GHz Mesh is disabled. Connect one unit by Ethernet and set passwords immediately. Preserved upgrades keep existing address/password.

The initial UI is Chinese. Open System → System → Language and Style (系统 → 系统 → 语言和界面), select English, and click Save & Apply (保存并应用).

Validation and attribution

The live Wi-Fi fix passed EHT160 reload and software-reboot checks on two units. The 1.5 image passed offline content/version/credential/translation checks; kernel, device tree, wpad and mt76/MT7996 binaries match v1.4. Publication is approved by the maintainer; complete new-image post-flash acceptance is not recorded. Historical 10G/Mesh benchmarks are not new v1.5 results or guarantees for every environment.

See changes and attribution. Original component licenses remain applicable.

Assets 6
Loading