Repository navigation
Programs and keygroups
A program puts samples on the keyboard. As on the sampler, it is a set of keygroups, each one a sample over a key range, with its pitch. A bank has 32 programs, P1 to P32, as the sampler has (see Banks and memory).

- PROG ◀ / PROG ▶ on the panel, or PROGRAM at the top of the PROGRAM view
- BANK in the PROGRAM view, or BANK ▶ on the panel, for the same program number in another bank
- MIDI program change, and bank select (controller 0)
Type a name for the program in the field next to the number. CLEAR PROGRAM takes all its keygroups out; the samples stay in memory.
Each row is a keygroup:
| Sample | The sample it plays, one of the bank's, shown with its slot (S02 STRINGS). Choosing another moves the keygroup to that sample. |
| LOW, HIGH | The key range. |
| ROOT | The key that plays the sample at its own pitch. |
| SEMI | Transpose, −60 to +60 semitones. |
| FINE | Fine tune, −100 to +100 cents. |
| PITCH | TRACK plays higher up the keyboard, FIXED plays every key at the root's pitch (the sampler's CONSTANT PITCH), as for drums. |
| M, S | Mute and solo, see Listening to one keygroup. |
| MOVE TO… | Moves the keygroup to another program, see Moving a keygroup. |
| ✕ | Removes the keygroup. |
Keygroups can overlap: then a key plays all of them, layered.
As on the sampler, select LOW, HIGH or ROOT (a ♪ shows next to its label) and play a key, on the screen, the computer
keyboard or a MIDI keyboard. A key played for LOW moves on to HIGH, so a range is two keys. Notes can also be typed
as names, like C1 or F#2. Notes are named as on the sampler, where C3 is MIDI note 60.
- ADD KEYGROUP in the PROGRAM view adds one over the whole keyboard, for the selected sample if it is in this bank, else for the bank's first sample.
- ADD TO PROGRAM in the SAMPLE view adds one for the selected sample, without leaving the SAMPLE view. The sample has to be in the current bank.
Then set its key range. In the picture above, P1 has the organ from C3 up and the bass below it: a split.

In the SAMPLE view, the PROGRAMS box under the selected sample's bank and slot lists the programs it has keygroups in, with their key ranges. Click one to open it here, with the sample's keygroup selected. A sample in no bank keeps its keygroups: they are listed with the program numbers they will play in once the sample is in a bank.

The bars above the keys show the program's keygroups, and the green dot on a bar is its root. Click a bar to select that keygroup in the PROGRAM view.
Drag a bar to change its keygroup, and the display shows the new range as you go:
- An end of the bar moves LOW or HIGH. The root stays where it is.
- The middle of the bar moves the whole keygroup: LOW, HIGH and ROOT together, so it plays the same, only on other keys. Dragged an octave up, a keygroup from C0 to C6 with its root at C3 is then C1 to C7, root C4.
The pointer shows which it will be: a two-way arrow at the ends, a hand in the middle. A keygroup can be dragged past the ends of the keyboard. An end that is off the keyboard can't be grabbed, but the middle can.

Where keygroups overlap, a key plays all of them. To hear one alone:
- S (solo) plays only the soloed keygroups. Solo more than one to hear them together.
- M (mute) leaves a keygroup out.
When any keygroup is soloed, only the soloed ones play, muted or not. Turn S off again to go back. The bars show it: a soloed keygroup's bar has an S and a green outline, and the bars that don't play are dimmed.

Mute and solo are only for listening while you work. They aren't saved, and don't change what is sent to the sampler.
MOVE TO… on a keygroup's row lists the other programs of the bank. Pick one, and the keygroup moves there as it
is, with its sample, key range and tuning. It leaves the current program. The display says where it went
(MOVED TO P03).
A keygroup can't move to another bank on its own, as it belongs to its sample, and a sample plays in its own bank. To use a sample in another bank, move the sample there (BANK in the SAMPLE view): all its keygroups go with it. See Banks and memory.
As on the sampler, a sample's sound (level, filter, release, LFO) is the sample's own, not the program's. Every program that plays a sample sounds the same with it. See Sound: OUT and LFO.
As on the sampler, the key ranges belong to the samples: a program is the keygroups of the samples in its bank's slots. So programs travel with the samples:
- RECEIVE puts a sample's key ranges from the sampler in the programs of the same numbers. See Receiving samples.
- SEND sends the sample's key ranges from the programs to the sampler. See Sending samples.
- WAV files saved from Axs7 and disk images keep them. See Loading samples.
The sampler is simpler than this, and a sample sent or saved for it is fitted to it, with a line in the MIDI log for each change:
- It keeps one key range for a sample in each program. A sample with two keygroups in one program sends only the first of them.
- The root key and fine tune belong to the sample, not the keygroup. The first keygroup's are used, and the other keygroups' roots go into their transpose.
- It has 32 programs, and transposes at most 5 octaves either way.
With the sampler
Without a sampler
Banks and memory
SM-87 on the M-VAVE FM-1