Skip to content

Programs and keygroups

Roger Klaveness edited this page Nov 5, 2026 · 8 revisions

Programs and keygroups

A program puts samples on the keyboard. As on the X7000, it is a set of keygroups, each one a sample over a key range, with its pitch. A bank has 32 programs, P1 to P32, as the sampler has (see Banks and memory).

The PROGRAM view

Choosing a program

  • PROG ◀ / PROG ▶ on the panel, or PROGRAM at the top of the PROGRAM view
  • BANK in the PROGRAM view, or BANK ▶ on the panel, for the same program number in another bank
  • MIDI program change, and bank select (controller 0)

Type a name for the program in the field next to the number. CLEAR PROGRAM takes all its keygroups out; the samples stay in memory.

Keygroups

Each row is a keygroup:

Sample The sample it plays.
LOW, HIGH The key range.
ROOT The key that plays the sample at its own pitch.
SEMI Transpose, −60 to +60 semitones.
FINE Fine tune, −100 to +100 cents.
PITCH TRACK plays higher up the keyboard, FIXED plays every key at the root's pitch (the X7000's CONSTANT PITCH), as for drums.
✕ Removes the keygroup.

Keygroups can overlap: then a key plays all of them, layered.

Setting keys by playing them

As on the sampler, select LOW, HIGH or ROOT (a ♪ shows next to its label) and play a key, on the screen, the computer keyboard or a MIDI keyboard. A key played for LOW moves on to HIGH, so a range is two keys. Notes can also be typed as names, like C1 or F#2. Notes are named as on the X7000, where C3 is MIDI note 60.

Adding keygroups

  • ADD KEYGROUP in the PROGRAM view adds one for the selected sample, over the whole keyboard.
  • ADD TO PROGRAM in the SAMPLE view does the same, without leaving the SAMPLE view.

Then set its key range. In the picture above, P1 has the organ from C3 up and the bass below it: a split.

On the keyboard

Keygroups shown above the keys

The bars above the keys show the program's keygroups. Click a bar to select that keygroup in the PROGRAM view.

Sound belongs to the sample

As on the X7000, a sample's sound (level, filter, release, LFO) is the sample's own, not the program's. Every program that plays a sample sounds the same with it. See Sound: OUT and LFO.

Programs and the sampler

Programs travel with the samples:

  • RECEIVE puts a sample's key ranges from the sampler in the programs of the same numbers. See Receiving samples.
  • SEND sends the sample's key ranges from the programs to the sampler. See Sending samples.
  • WAV files saved from Axs7 and disk images keep them. See Loading samples.

The sampler is simpler than this, and a sample sent or saved for it is fitted to it, with a line in the MIDI log for each change:

  • It keeps one key range for a sample in each program. A sample with two keygroups in one program sends only the first of them.
  • The root key and fine tune belong to the sample, not the keygroup. The first keygroup's are used, and the other keygroups' roots go into their transpose.
  • It has 32 programs, and transposes at most 5 octaves either way.

Next

Clone this wiki locally