Repository navigation
Signal analyzer
The Signal Analyzer window is opened from the I/Q analyzer window. It uses the currently selected I/Q channel and runs a signal-specific decoder or measurement view.
The analyzer itself does not use context help inside the application. The individual decoder windows and tables contain many technical parameters, so this Wiki section explains the most important fields and abbreviations.
- Generic QAM signal analyzer - generic I/Q quality, clipping, DC offset and stability.
- FM RDS analyzer - FM pilot and RDS group decoding.
- DAB analyzer - DAB Mode I OFDM detection and DQPSK constellation.
- DVB-T analyzer - DVB-T OFDM synchronization, TPS and constellation.
- DVB-T2 analyzer - DVB-T2 P1/L1 signalling and PLP parameters.
- ISM 868 analyzer - wide-band SRD discovery and Wireless M-Bus, LoRa and sensor decoding.
- GSM 2G downlink analyzer - GSM FCCH/SCH/BCCH acquisition, cell information and paging observations.
- UMTS 3G downlink analyzer - UMTS CPICH/BCH/SIB/PCH acquisition and code-domain load estimate.
- LTE 4G downlink analyzer - LTE cell search, MIB/SIB decoding and air-load estimate.
- 5G NR downlink analyzer - NR SSB/PBCH/SIB1 acquisition and air-load estimate.
- Bluetooth analyzer - CRC-valid Bluetooth LE advertising packets and session device inventory from the current I/Q passband.
- Wi-Fi analyzer - 802.11 DSSS/OFDM acquisition, AP/client details and channel observations.
Most modes show the tuned center frequency, I/Q sample rate, RMS level and peak sample value.
- RMS dBFS - average signal level relative to digital full scale.
- Peak - highest absolute I/Q sample value in the current processing window.
- dBFS - decibels relative to full-scale digital I/Q samples; this is not calibrated RF power.
- CFO - carrier frequency offset; estimated frequency error between the tuned center and the received signal.
- CRC OK - the decoded transport or signalling block passed its cyclic redundancy check.
-
wait...or--- the field is not decoded yet, not present, or not applicable.
- Green normally means good lock or valid decoding.
- Yellow means marginal or weak lock.
- Red means the selected signal, bandwidth, gain or tuning probably needs adjustment.
The exact quality percentage is mode-specific. It usually combines synchronization confidence, pilot/reference quality, error checks and signal level.
Many values are live estimates from the currently visible I/Q stream. They are useful for field diagnosis and signal identification, but they are not a replacement for calibrated protocol test equipment.