Repository navigation
Terminal Commands
868meshbot edited this page Nov 3, 2026
·
1 revision
The Terminal app takes typed commands. The same commands work over the USB
serial port (115200 baud), where the prompt is OPS> . Type help for the list.
Received messages also appear in the Terminal, as do replies from repeaters.
| Command | What it does |
|---|---|
help |
List the commands. |
get radio |
Show the radio settings. |
set name <name> |
Set the device name. |
set lat <deg> / set lon <deg>
|
Set your position by hand. |
set freq, sf, bw, tx, cr, af + value |
Set a radio parameter. |
clock [analog] |
Show the time and start the clock screensaver. |
time <epoch-seconds> |
Set the clock. |
memory |
Free memory. |
battery |
Battery voltage and level. |
reboot |
Restart. |
shutdown |
Power off (T-Deck: click the trackball to turn it back on). |
gps [on|off|intermittent] |
Set the GPS mode, or show its status. |
sd |
SD card status. Also sd mount, sd unmount, sd restore, sd ls [path]. |
identity show |
Show your node's public key. |
identity restore |
Restore the identity from the SD card backup. |
screenshot [name] |
Save a screenshot to the SD card. |
touch-cali |
Calibrate the touchscreen (T-Deck). touch-cali reset undoes it. |
saitama-scr |
Start the Saitama screensaver (T-Deck). |
| Command | What it does |
|---|---|
card |
Print your business card, to share. |
import <card> |
Add a contact from someone's business card. |
list [n] |
List saved contacts (the last n). |
messages <n|all> / clearmessages
|
Show or clear the message log. |
find <id> |
Look up a contact by ID. |
to <name|prefix> then send <text>
|
Send a DM. |
public <text> |
Post on the Public channel. |
ch3 <text> … ch5 <text>
|
Post on channel slot 3, 4 or 5. |
channels |
List the channels. |
channel <1-10> |
Show one channel, including its key in base64. |
setchannel <1-10> #<name> [psk] |
Set up a channel. |
clearcontacts / contacts delete <prefix>
|
Remove contacts. |
advert [flood] |
Send an advert now. |
adverts |
Turn on or off showing adverts in the Terminal as they arrive. |
quiet |
Turn new-message popups off or on. |
| Command | What it does |
|---|---|
trace <path> |
Trace a route (T-Deck). |
getpath <hex> / setpath <hex> <path>
|
Show or set the route to a node. |
resetpath <hex> / reset path
|
Forget a route. |
scope / scope #<region> / scope clear
|
Show, set or clear the default region scope. |
pathsize [1|2|3] |
Routing hash size in bytes. |
| Command | What it does |
|---|---|
repeaters [secs] |
Ask all repeaters for their status. |
replist / clearrep
|
List or clear saved repeaters. |
repeateradmin <hex> [pass] |
Log in to a repeater as admin. |
repadmin [<hex>] <cmd> |
Send an admin command (log in first). Replies appear in the Terminal. |
<hex> is the start of the node's public key, as shown in Contacts or Repeaters.