Getting Started

Getting started

Requirements

• Minecraft Bedrock Edition 1.21.90 or newer
• Both included packs active at the same version
• No experiments, cheats, or operator permissions

Installation

1. Download Andys_Dyeable_Item_Frames_3.1.19.mcaddon from the releases page.
2. Open the file with Minecraft Bedrock.
3. Wait for both packs to import.
4. Create a world, or edit an existing one.
5. Activate Andy's Dyeable Item Frames BP under Behavior Packs → My Packs.
6. Confirm Andy's Dyeable Item Frames RP is active under Resource Packs.
7. Enter the world.

Back up important worlds before installing or updating any add-on.

Crafting

Both recipes are shapeless and use a Crafting Table.

1 Item Frame      + 1 Leather = 1 Dyeable Item Frame
1 Glow Item Frame + 1 Leather = 1 Dyeable Glow Item Frame

Obtaining any of the 16 dyes unlocks both recipes in your recipe book.

Dyeing your first frame

1. Place a cauldron and fill it with water.
2. Interact with the water while holding the dye you want.
3. Hold a stack of Dyeable Item Frames or Dyeable Glow Item Frames.
4. Interact with the dyed water.

The whole held stack takes the color at once, so dye a full stack before you start placing.

If you mix dyes into a shade that is not one of the 16, the placed frame uses the closest supported color.

Placing frames

Place them exactly as you would a vanilla item frame. Walls, floors, and ceilings all work, and the dyed panel shows correctly on all six sides.

Break a frame and it drops in its dyed color, so you can never lose the color by picking one back up.