ESP32 Method of USB Programming Burning

flash_download_tool Download： https://docs.espressif.com/projects/esp-test-tools/zh_CN/latest/esp32/production_stage/tools/flash_download_tool.html

1. Run the ESP programming/flashing program

2. After selecting ESP32, click OK

3. After confirming the following options, click "Start" and the automatic programming/flashing will begin

*If it fails to enter the programming/flashing mode You need to disassemble the device to check if there is a resistor in the red-circled area. If not, please short-circuit the position indicated by the red arrow, and this will resolve the issue.