Zigbee2MQTT Operation Guide

To use z2M, a plugin needs to be installed.

1.Install the Mosquitto broker and the Zigbee2MQTT plugin.

2. For initial use, you need to configure the account and password for the Mosquitto broker.

*It is important to pay attention to the input format: there should be a hyphen and a space before the username. Incorrect formatting will result in malfunction.

3.After the setup is completed, switch to the info page to start the Mosquitto broker.

4.Check the USB port,Settings-->System-->Hardware-->All hardware.

5.Enter Zigbee2MQTT, and configure CC2652P (ETH-52P) with reference to the following figure.

For MG2x (ETH-MG2x), refer to the following figure for configuration.

6.Start Zigbee2MQTT and check the startup log，the following figure shows the log of Z2M (Zigbee2MQTT) successful startup.

7.Access the Zigbee2MQTT page to add a Zigbee device

zigbee dongle Z2M操作教程.docx