Skip to content

Home

Jump to bottom
P0k3sm0t edited this page May 16, 2026 · 14 revisions

Ray5 Pilot Wiki

Welcome to the Ray5 Pilot Wiki.

This wiki contains setup guides, feature notes, and workflow instructions for using Ray5 Pilot with a Longer Ray5 laser engraver.

Ray5 Pilot is a local web controller for the Longer Ray5 using the ESP3D-style HTTP/WebSocket interface. It includes dashboard controls, camera overlay tools, timelapse support, SD file management, machine settings, and workflow helpers for compatible laser software.

Available Guides

Camera Overlay Setup Guide

Learn how to set up and adjust the Ray5 Pilot camera overlay system.

This guide covers:

  • Setting up a camera feed
  • Taking overlay snapshots
  • Understanding raw vs processed overlay images
  • Calibrating the overlay
  • Adjusting X and Y source offsets
  • Using scale to fine-tune the overlay view
  • Testing alignment with a grid
  • Using the processed overlay image as a reference in laser software

Open the Camera Overlay Setup Guide

Planned Wiki Topics

More guides may be added over time, including:

  • First-time Ray5 Pilot setup
  • Dashboard controls
  • Timelapse setup
  • SD card file management
  • Machine Settings page usage
  • Safe Test Fire usage
  • Troubleshooting Ray5 connection issues
  • Using Ray5 Pilot with different laser software workflows

Safety Notice

Ray5 Pilot controls a laser engraver. Always supervise laser operation, use proper eye protection, keep fire safety equipment nearby, and verify all settings and files before running a job.

Changing machine settings can affect motion limits, homing, acceleration, travel, and laser behavior. Back up your settings first and change only values you understand.

Clone this wiki locally