Skip to content

Devices Transition

Arie J. Godschalk edited this page Nov 15, 2026 · 1 revision

Transition device

Home · Devices · Stopwatch · Timer

The Transition device represents one named transition. A transition moves a numeric value from a start value to an end value over time. The device is optional; a Flow can start and monitor the transition without it.

Contents

Before you add it

  1. Create a Flow with Start or replace transition or Start or resume transition. Enter a fixed name, numeric start and end values, at least two steps, and a duration.
  2. Save and enable the Flow so the name is available.
  3. In Homey, choose Add device → Chronograph → Transition, then select that name.
  4. Run the Flow to start the transition.

The picker lists configured names for the selected type. A transition named Living room dim is separate from a stopwatch or timer with the same name.

What it shows

The Duration capability shows elapsed time in seconds, not the current transition value. The Started indicator remains on while the transition is paused. When it reaches its target duration, it finishes and is removed.

To apply step values to another device, create a separate Flow using Transition reached a step. Connect its Transitionvalue token to an input the target device accepts. The transition device does not control that device by itself.

Controls

  • Pause / Resume freezes the elapsed time or continues from the paused value.
  • Start / Stop stops the current transition or starts it again using the arguments retained from its most recent start Flow.

Run the transition from a Flow once before relying on the device Start control. The device does not provide a form for entering new start/end values or steps.

Flowcards

Chronograph does not add device-scoped Flow cards. These app-level cards address the selected type and exact name; the optional device represents that same chronograph.

Triggers

Complete triggers index

Card Purpose
Transition is started Starts the Flow when a new transition starts; resuming does not count as a new start.
Transition is finished Starts the Flow when the transition reaches its target duration and finishes.
Transition is stopped Starts the Flow when the transition is explicitly stopped.
Transition reached a step Starts the Flow at transition steps and provides the interpolated value and endpoint flags.
Transition is paused Starts the Flow when the running transition is paused.

Conditions

Complete conditions index

Card Purpose
Transition is running or not Tests whether a matching transition is currently running.
Transition longer or shorter than Tests whether the transition's elapsed time is greater than the selected threshold.

Actions

Complete actions index

Card Purpose
Start or replace transition Creates or replaces the named transition with the supplied start values.
Resume transition Resumes a matching paused transition; it does not create one.
Start or resume transition Starts the transition if absent, resumes it if paused, and leaves it running if already active.
Pause transition Pauses the named transition without removing it.
Adjust transition Adds or subtracts elapsed time on the named transition.
Stop transition Stops and removes the named transition.
Get the duration of a transition Returns elapsed and remaining time in numeric and formatted Flow tokens.
Stop all transitions Stops and removes all active transitions at once.

Example

To fade a compatible light from off to full brightness, use the same name Living room dim on the step trigger and start action. Set the trigger's Transitionvalue token as the light's dim level, then start the transition from 0 to 1 over 5 minutes. See the complete gradual dimming example.

Expected result: the device shows elapsed time; the connected Flow sends the step values to the light. The visible result depends on the target device's numeric range and how quickly its driver applies updates.

For shared pairing and control details, see Devices. For other transition behavior, see Flow triggers.

Clone this wiki locally