Skip to content

Flows Actions transition_start

Arie J. Godschalk edited this page Nov 17, 2026 · 2 revisions

Home · Flows · Actions

Start or replace transition

What it does

Creates or replaces the named transition with the supplied start values.

Before you start

  • Use the exact type and name you want to target. A transition and another chronograph type with the same name are separate.
  • Save and enable this Flow so its name appears in related cards, device setup and widget pickers.

Arguments

Field Type How to use it
Pick autocomplete Choose or type a configured name.
Name (* BLL supported) text Used if Pick is empty; Pick wins if both are set. Accepts BLL code when Better Logic Library is installed.
From number Minimum: 0 Step: 0.01
To number Minimum: 0 Step: 0.01
Steps number Minimum: 2 Step: 1 At least 2; short transitions can use fewer effective steps.
Duration (* BLL supported) text Accepts BLL code when Better Logic Library is installed.
Unit dropdown Choose: seconds, minutes, hours, days

Enter a name in Name or choose one in Pick. The picker takes precedence if both are set. Names appear in suggestions after a relevant enabled Flow has been saved. * matching is supported only where noted below; it cannot be used to create a chronograph.

Output tokens

This card does not provide output tokens.

Behavior and limitations

  • Starting the same transition name replaces its active instance. Duration must be non-negative and the step count at least 2; short transitions may use fewer effective steps.

Example

Set Name to Living room dim, From to 0, To to 1, Steps to 11, Duration to 5, and Unit to minutes. Expected result: a five-minute transition emits values from 0 to 1; connect its step trigger to a compatible light action to see the change. To see the values without a light, try the Timeline example.

Related pages

Full actions guide · All cards · Examples · Troubleshooting

Clone this wiki locally