Repository navigation
Flows Conditions timer_compare
Home · Flows · Conditions
Tests whether the timer has more than the selected time remaining.
- Use the exact type and name you want to target. A timer and another chronograph type with the same name are separate.
- The named timer must exist. A paused timer remains available for remaining-time comparison.
| Field | Type | How to use it |
|---|---|---|
| Pick | autocomplete | Choose or type a configured name. |
| Name (* BLL supported) | text | Used if Pick is empty; Pick wins if both are set. Accepts BLL code when Better Logic Library is installed. |
| Duration | number | Minimum: 0 Step: 0.01 |
| Unit | dropdown | Choose: seconds, minutes, hours, days |
Enter a name in Name or choose one in Pick. The picker takes precedence if both are set. Names appear in suggestions after a relevant enabled Flow has been saved. * matching is supported only where noted below; it cannot be used to create a chronograph.
This card does not provide output tokens.
- Use one exact name. This card does not match wildcard names.
Before you start: run a start Flow for a timer named Kitchen fan, then add this condition to a Flow. Set Duration to 2 and Unit to minutes. Expected result: the condition is true only when remaining time is greater than two minutes; invert it for the opposite comparison.
Full conditions guide · All cards · Examples · Troubleshooting
Support development - If Chronograph is useful to you, you can support its
continued development through GitHub Sponsors,
Patreon,
PayPal, or
bunq.
Thank you!