Repository navigation
Flows Triggers timer_elapsed
Starts the Flow when the selected amount of time has elapsed since the timer started.
- Use the exact type and name you want to target. A timer and another chronograph type with the same name are separate.
- Save and enable this trigger Flow before starting the chronograph; its saved threshold or name is applied when the chronograph starts.
| Field | Type | How to use it |
|---|---|---|
| Pick | autocomplete | Choose or type a configured name. |
| Name (* BLL supported) | text | Used if Pick is empty; Pick wins if both are set. Accepts BLL code when Better Logic Library is installed. |
| Elapsed time | number | Minimum: 0 Step: 0.01 |
| Unit | dropdown | Choose: seconds, minutes, hours, days |
Enter a name in Name or choose one in Pick. The picker takes precedence if both are set. Names appear in suggestions after a relevant enabled Flow has been saved. * matching is supported only where noted below; it cannot be used to create a chronograph.
| Token (key) | Type | Meaning |
|---|---|---|
Name (name) |
string | The exact configured chronograph name. |
Elapsed time (s) (seconds) |
number | The configured elapsed-time threshold, in seconds. |
- The Name field accepts
*for matching multiple names.
Before you start: save and enable the threshold Flow before starting the timer. Set Name to Kitchen fan, Elapsed time to 8, and Unit to minutes; connect it to a notification. Expected result: the Flow runs after eight minutes have elapsed, even if a ten-minute timer has two minutes remaining.
Full triggers guide · All cards · Examples · Troubleshooting
Support development - If Chronograph is useful to you, you can support its
continued development through GitHub Sponsors,
Patreon,
PayPal, or
bunq.
Thank you!