Skip to content

Flows Triggers timer_stopped

Arie J. Godschalk edited this page Nov 15, 2026 · 1 revision

Home · Flows · Triggers

Timer is stopped

What it does

Starts the Flow when the timer is explicitly stopped.

Before you start

  • Use the exact type and name you want to target. A timer and another chronograph type with the same name are separate.
  • Save and enable this trigger Flow so its name is available and the Flow can respond to the event.

Arguments

Field Type How to use it
Pick autocomplete Choose or type a configured name.
Name (* BLL supported) text Used if Pick is empty; Pick wins if both are set. Accepts BLL code when Better Logic Library is installed.

Enter a name in Name or choose one in Pick. The picker takes precedence if both are set. Names appear in suggestions after a relevant enabled Flow has been saved. * matching is supported only where noted below; it cannot be used to create a chronograph.

Output tokens

Token (key) Type Meaning
Name (name) string The exact configured chronograph name.
Duration (s) (seconds) number The time remaining on the timer at the event, in seconds.

Behavior and limitations

  • The Name field accepts * for matching multiple names.

Example

Before you start: start the named timer and add a separate Flow using this card with the same name. Connect it to a notification. Expected result: the Flow runs when the timer is explicitly stopped, not when a timer or transition finishes naturally.

Related pages

Full triggers guide · All cards · Examples · Troubleshooting

Clone this wiki locally