Repository navigation
Tutorials 3 Fences Barriers and MultiSelect
Part of the EOD Recomp Modding & World Editor Tutorials · Previous: Tutorial 2: Your First Track Mod & PIE · Next: Tutorial 4: Cars, Wrecks & Scatter Brush
In this tutorial, you will learn why retail tracks block cars with 16-metre invisible walls and distant pop-in billboards, how to use Shift+Click, Select All Similar, and Delete All Similar to wipe out entire fence lines (including their overlapping lod-* billboard twins), and how to flatten SOBL (track.sol) collision barriers for true open-world driving.
When Monster Games authored the 15 retail tracks in SLUS_209.10, every perimeter fence was built from three independent records:
-
High-Detail 3D Fence Meshes (
track.grfchild 0leaves): Individual fence segments (fnce.tex,wire.tex,wd-fnc1.tex). -
Overlapping
lod-*& Billboard Twins (GRAFLOD groups0x0&MSCAL 0x6Asprites): Lower-detail duplicate meshes (child 1,child 2) or camera-facinglod-*cards at the exact same coordinates that only draw when the camera is 50–250 m away. If you delete only the close-up mesh, the fence reappears as soon as you drive away! -
16-Metre Invisible Collision Walls (
track.sol,SOBLv3): 264-byte (0x108) Oriented Bounding Boxes with a half-height ofry = 15.0 mcentered ~1 m above the road (top = 16.0 mabove ground!). Because theSOBL2D quadtree broadphase (0x00177CA0) never testsY, that 15 m half-height is the sole barrier keeping cars inside the arena.
- Fly to the fence section you want to open up (for example, Woodly's outer wooden fence or Dennison's highway access gap).
-
LMBClick the first fence panel to select it. - Hold
ShiftandLMBClick neighboring fence panels to add them to your multi-selection set. - Drag the 3D gizmo to move all selected segments together, or press
Delto delete them in one undoable command (Ctrl+Z).
To remove an entire fence line and every hidden lod-* duplicate in one click:
- Select one fence panel in the 3D viewport.
-
Right-click (
RMB) (or use the Object Inspector in the Right Panel) and select:-
Select All Similar (Same Texture / Family + LOD Twins)— selects every fence segment sharing the primary texture (fnce.tex,chlink.tex, etc.) plus every sibling child in theirGRAFLOD group (0x0) and overlappinglod-*billboard twins. -
Delete All Similar (Fences + LOD Twins)— deletes the entire fence line and all of its distant LOD twins in a single undoable step! -
Delete Selected + Overlapping LOD Twins in Radius (15m)— surgically opens a gap where you selected 2–3 panels while also sweeping away any overlappinglod-*twins at those coordinates.
-
- On compile (
Ctrl+Shift+SorF5), deleted retailtrack.grfleaves and theirlod-*twins have theirq199.yworld offset patched toY = -5000.0 m(with updatedmlistand0x102cull spheres), keepingtrack.grfbyte-size invariant.
- Click the
🛡 Collision Shieldpill in the top-left corner of the viewport (or enableSOBL BarriersinExplorer → Layers). - All
SOBLboxes intrack.solrender as 3D wireframes color-coded by height above the ground:-
Red (
>= 10.0 m): 16 m invisible wall ceilings. -
Orange (
3.0 m – 10.0 m): Medium building/fence walls. -
Yellow (
< 3.0 m): Low kerbs or lowered walls.
-
Red (
- Choose your barrier-removal mode:
-
Single / Selected Barrier: Click any red wireframe box to open the SOBL Barrier Inspector (Page 5 of the Right Panel) and click
Flatten Barrier (-0.5 m Below Ground)(or dialTarget Top Above Ground = 1.2 mfor a jumpable low wall). -
Keep Outer World Perimeter Only: Choose
Collision → Flatten Interior Barriers (Keep Outer Perimeter)to drop all infield, barn, and shortcut walls below ground while keeping the outermost map-edge boundary so AI cars don't fall into the void. -
Full Open-World Free Roam: Choose
Collision → Remove / Flatten All Track Barriersto lower every vertical invisible wall on the track below ground in one undoable command (world_collision.apply_box_edits).
-
Single / Selected Barrier: Click any red wireframe box to open the SOBL Barrier Inspector (Page 5 of the Right Panel) and click
- Press
F5(Play Free Roam), enableManual Recovery Onlyin theF1 → Gameplaymenu, and drive straight out into the surrounding countryside!
Next Tutorial: Tutorial 4: Placing Cars, Wrecked AI Cars & Scattering Props (Lumion/Twinmotion Workflow)
Test Drive: Eve of Destruction (SLUS_209.10) Static Recompilation & Creation Kit · Target ELF SHA-256: 4f60053dc141365f5ae50737622f8408be30ced513b4c109427c926461f2e2ae · Repository · Tutorials · Architecture · Plume Renderer · File Formats · Symbols · World Editor
- All Tutorials (1–7 Overview)
- 1. Zero-Friction ISO Setup & Controls
- 2. Your First Track Mod & PIE
- 3. Deleting Fences & SOBL Barriers
- 4. Cars, Wrecks & Scatter Brush
- 5. AI Pathfinding (
ILIN) & Custom Modes - 6. 4K Textures, Skyboxes & NASCAR Cars
- 7. Packaging & Sharing
.eodmodMods
-
Architecture Overview
- EE, VU1, GS, IOP, Memory Map & PS2 Limits
-
Native Plume Renderer
- Stages R0–R8, VIF Decoder, Classic/Modern & Gates
-
File Formats Encyclopedia
- All 24 FourCC Formats, 72 Archives & 7,329 Assets
-
Decompiled Subsystems & Symbols
- Addresses, HLE Hooks,
EOD_DIFF, Physics & AI
- Addresses, HLE Hooks,
-
World Editor & Creation Kit
- ADRs 01–08, JTBD Matrix, Fishbones & Toolchain