Cruiser 5.3.0 #757
Replies: 11 comments 53 replies
-
|
@MotoUKRider Thank you again for your excellent work on Motorider and Biker map themes! 👍 |
Beta Was this translation helpful? Give feedback.
-
|
@devemux86 It's been a good learning-curve, and thanks to you and the users who keep me busy 👍 |
Beta Was this translation helpful? Give feedback.
-
|
Hello, I have now installed version 5.3.0-b12. Does the Cruiser app recognize by itself if the Playstore version is more recent, or should I delete the version and download the latest one from the Playstore? Hallo, ich habe ja jetzt die Version 5.3.0-b12 installiert. Erkennt die Cruiser App von alleine, wenn die Version Playstore aktueller ist, oder soll ich die Version löschen und die aktuelle aus dem Playstore laden? |
Beta Was this translation helpful? Give feedback.
-
|
It will be automatically updated with the Google Play version. Sie wird automatisch mit der Google Play-Version aktualisiert. |
Beta Was this translation helpful? Give feedback.
-
|
Problem with 5.3b12: |
Beta Was this translation helpful? Give feedback.
-
|
The crash cannot be reproduced since then... |
Beta Was this translation helpful? Give feedback.
-
|
@Leeb64 What map engine? What device? |
Beta Was this translation helpful? Give feedback.
-
|
@Leeb64 Did the previous profile have NO hillshading and the new active profile has hillshading enabled? |
Beta Was this translation helpful? Give feedback.
-
|
Karten engine: VTM |
Beta Was this translation helpful? Give feedback.
-
|
@Leeb64 If you scroll / zoom the map to areas where the hillshading was not created before, Note: changing the hillshading magnitude clears the existing hillshading cache. |
Beta Was this translation helpful? Give feedback.
-
|
another thing. Brouter Profile is written in red: The two switches: If I now go to under Route Calculation it says: I now switch to: I find the same sentence in -> I think in the first case it should be there instead of "Normal calculation of the route" ->"Intellegent calculation of route sections" next: |
Beta Was this translation helpful? Give feedback.
-
|
@Leeb64 Red is just your selected app color. Everyone can select a different app color. These options are only provided by BRouter, so they need to be in BRouter settings. These BRouter options only work with normal route calculation mode. |
Beta Was this translation helpful? Give feedback.
-
|
The (colored) label under: |
Beta Was this translation helpful? Give feedback.
-
|
@Leeb64 Please provide some screenshots to understand what you mean. If you mean the "Correct misplaced waypoints" and "Use distant waypoints", They cannot be hidden, as users should know their existence. |
Beta Was this translation helpful? Give feedback.
-
|
No matter what is set under Routing Advanced, the same is always displayed under BRouter(offline).Advanced
|
Beta Was this translation helpful? Give feedback.
-
|
Again:
|
Beta Was this translation helpful? Give feedback.
-
|
"Correct misplaced waypoints" and "Use distant waypoints" cannot work in "Intelligent" routing mode. If you want to use these options, select the "Normal" or "Manual" routing mode. |
Beta Was this translation helpful? Give feedback.
-
|
I get that. It's not about the waypoints! |
Beta Was this translation helpful? Give feedback.
-
|
@Leeb64 This title will change to "Calculation of the whole route". |
Beta Was this translation helpful? Give feedback.
-
|
hmm.. OK |
Beta Was this translation helpful? Give feedback.
-
|
Hello, What I've found so far :
I was forced to cancel the navigation and to start again for the new "Nearby points of interest" being displayed
I was forced to cancel the navigation and to start again for the new Group of favorites being displayed REM : |
Beta Was this translation helpful? Give feedback.
-
|
@jcz7021 Thanks for the report.
These settings adjust the visibility of the nearby panels:
About changing the nearby POI / favorites, currently as you correctly found, they are set when navigation starts. I will see so the nearby POI / favorites can also be changed after navigation has started. |
Beta Was this translation helpful? Give feedback.
-
@jcz7021 This will be available in the next Cruiser update. |
Beta Was this translation helpful? Give feedback.
-
@jcz7021 This is available for testing in: |
Beta Was this translation helpful? Give feedback.
-
|
Beta Was this translation helpful? Give feedback.
-
|
There is an option in navigation / advanced settings: "After arrival at destination, follow user location", Should we change the default and have this setting enabled on new installations? |
Beta Was this translation helpful? Give feedback.
-
|
wouldn't be the worst idea.... |
Beta Was this translation helpful? Give feedback.
-
|
I have this feature enabled... 👍 |
Beta Was this translation helpful? Give feedback.
-
|
I think it is a good idea to enable it on a new installation |
Beta Was this translation helpful? Give feedback.
-
|
Enabled is better |
Beta Was this translation helpful? Give feedback.
-
|
My assumption is, thats navigation usually discard planned route, and turn to the default. Which would be Cruiser's "Follow location", when GPS is enabled I guess (as navigation usually doesnt start with not showing GPS position, when GPS module is ON and locked). There is some features, like popsup Arrived at destination, wanna find parking, or just OK, optional, but thats not standard as such in my eyes.. What I think is standard is telling/asking user that he should be at the end, and delete the route automatically or after confirmation from user (for the cases when user click I am not there yet or something like that so he wanted to continue in planned trip).. When I thinking about that, deleting route after end of trip would be convinient for me, as I am used from other navis to have clean sheet after to plan new (or return) route after spending some time in destination .. With cruiser, I usually manualy clicking Menu - Routes - Clear - yes after reaching destination point all the time :) |
Beta Was this translation helpful? Give feedback.
-
|
I've completed my first two rides after the winter break with version 5.3.0 and have to say I'm 99.9% satisfied with the app's performance! Very well done @devemux86! 👍 What I did notice, however, is that the location displayed on the map always lags a few meters/milliseconds behind the actual location. This isn't always pleasant, especially when turning or in sharp corners/hairpin bends. It doesn't matter whether the location service is set to "Google Play Services" or "Android API", although I imagine the accuracy while driving is a bit better with the second option. "Location at arrow tip" has the same (or no) effect on the perceived lag from the actual location with both options. I didn't notice this to this extent with version 4.1.0-b2, which I used until the end of last motorcycle season. 🤔 |
Beta Was this translation helpful? Give feedback.
-
|
@bios4 Try without the animation. We mentioned it before that animations introduce an expected delay where they work. Note: all apps with smooth motion have a delayed real location on the screen. |
Beta Was this translation helpful? Give feedback.
-
Ok will do, but it will take some time. Cold weather and even snow 🤮 will be returning in the next days... |
Beta Was this translation helpful? Give feedback.
-
|
We recently changed the "Animated location" to have as default the enabled status. |
Beta Was this translation helpful? Give feedback.
-
|
@devemux86 : Could you simply explains what the differences/purpose of each one ? Thanks ! |
Beta Was this translation helpful? Give feedback.
-
It's better to try both and select what works better on your device. |
Beta Was this translation helpful? Give feedback.
-
|
Thanks to all the programmers. Today we were on the road for the first time this season and what can I say, Cruiser 5 in 3D and with the new features of the WunderLINQ, everything was great. Thank you for building on Cruiser 4. Dankeschön an die ganzen Programmierer. Wir waren heute das erstemal diese Saison mal wieder länger unterwegs und was soll ich sagen, Cruiser 5 in 3D und mit den neuen Features des WunderLINQ's, es war alles super. Dankeschön, dass ihr an Cruiser 4 angeknüpft habt. |
Beta Was this translation helpful? Give feedback.
-
|
Thank you very much for the kind words and support! Vielen Dank für die freundlichen Worte und die Unterstützung! |
Beta Was this translation helpful? Give feedback.
-
|
Android 15 One Ui 7 My Samsung S24+ cell phone just wants to install Android 15 with One Ui 7. Does anyone have any initial experience? Is everything working here? Mein Samsung S24+ Handy möchte gerade Android 15 mit One Ui 7 installieren. Hat jemand schon erste Erfahrungen? Läuft hier alles? |
Beta Was this translation helpful? Give feedback.
-
|
S25+ here on Android 15 One Ui 7 no problems 👍 |
Beta Was this translation helpful? Give feedback.
-
Thanks for the info. Then everything should work with the S24+ and the S24. Danke für die Info. Dann sollte ja mit dem S24+ und dem S24 auch alles funktionieren. |
Beta Was this translation helpful? Give feedback.
-
|
I'm using version 5.3.0 on a Samsung S2 tablet running Android 7.0. When launching the app I keep getting "Cruiser has stopped". Restarting the app or the tablet or uninstalling and re-installing isn't changing anything. I'm 3 days away from a trip. Any help is highly appreciated. |
Beta Was this translation helpful? Give feedback.
-
|
@Zefram2063 Please try Cruiser 5.4.0 published on Google Play. You can also download the apk from Releases: https://github.com/devemux86/cruiser/releases |
Beta Was this translation helpful? Give feedback.
-
|
There was no version 5.4.0 on Google Play yesterday even though the release date says March 27. So this version is no longer crashing. I'll play with it today and let you know if there is any odd behavior. Thanks for the quick help. |
Beta Was this translation helpful? Give feedback.
-
I tried 5.3.1 beta 12 yesterday and it was doing the same thing. |
Beta Was this translation helpful? Give feedback.
-
|
@Zefram2063 Both 5.3.1 Beta 12 and 5.4.0 with the fix were released today.
👍 |
Beta Was this translation helpful? Give feedback.
-
|
If 5.3.1 beta 12 was also released today then I must have tested some other beta version. I tried so many things yesterday, sorry for the confusion. |
Beta Was this translation helpful? Give feedback.
Uh oh!
There was an error while loading. Please reload this page.
Uh oh!
There was an error while loading. Please reload this page.
-
Cruiser 5.3.0 is on Google Play:
OpenGL map rendering and 3D view in navigation #726
(Settings | Map | Advanced)
OpenGL is the new default map rendering engine.
Round trip planning with BRouter (offline) #707
(see the link for instructions)
Round trip planning with CycleStreets #729
(Settings | Routing | Advanced | Service)
(see the link for instructions)
Delete shaping points without calculation #543 (comment)
(see the link for instructions)
Show elevation at all locations on the map #703 (comment)
(long press on the map)
Display / record altitude above mean sea level #720
It works on all Android versions.
Show direction arrows on tracks #711
(Settings | Routing | Appearance)
(Settings | GPS recording | Appearance)
Route diagram color option and improvements #717
(Settings | Application | Appearance)
Description field in favorites, routes, tracks #346
Database of favorites, routes, tracks and profiles #706
(see the link for instructions)
High contrast option in map appearance #731
(Settings | Map | Appearance)
New map themes:
Arabic search normalization (diacritics and variants) #733
Czech language #719
Many improvements
Beta Was this translation helpful? Give feedback.
All reactions