-
Notifications
You must be signed in to change notification settings - Fork 1
GPS Sim
This app allows you to broadcast GPS baseband signal data streams.
You can use gps-sdr-sim to generate data for this app.
gps-sdr-sim -e RINEX_NAVIGATION_FILE -l LAT,LONG,HEIGHT -b 8 -o SOMENAME.C8
That will create SOMENAME.C8, but note that you also need to specify its sample rate and frequency in another file, as explained below.
Download the latest file for this parameter directly from Nasa: https://cddis.nasa.gov/archive/gnss/data/daily/
Create SOMENAME.TXT with:
sample_rate=SAMPLE_RATE
center_frequency=1575420000
Known working values for the SAMPLE_RATE:
This file should use the same filename as the .C8 file but with .TXT extension. It contains the sample rate and center frequency for the .C8 file. Copy the files to your PortaPack MicroSD and open the .C8 file in the GPS Sim app.
Create a rather small polygon with a path in KML format (i.e. a path you might want to simulate to walk). You can use Google Earth or another solution like https://www.doogal.co.uk/polylines.php. Load that file in the free SatGen NMEA simulator. In the generator, change the frequency to 10 Hz and export the NMEA.
gps-sdr-sim.exe -e brdc1180.20n -g NMEA.txt -b 8 -o TESTGPS.C8
You also need to create TESTGPS.TXT as specified above.
For a fixed position, use
gps-sdr-sim -e brdc1500.20n -s 1250000 -b 8 -o gpssim.C8 -l 30.286502,120.032669,100 -d 100
Test with a gpssim.txt as follows:
sample_rate=1250000
center_frequency=1575420000
NOTE: The website nmeagen may add timestamps to the output. That might be problematic for the simulation
We can create a realistic movement using a NMEA GGA stream generator like https://nmeagen.org/. In this website create several multi point lines with the positions you want. Download the NMEA file clicking "Generate NMEA file".
gps-sdr-sim.exe -e brdc3540.14n -g OUTPUT.nmea -b 8 -d DURATION -o MYGPSWALK.C8
You also need to create MYGPSWALK.TXT as specified above.
Depending on several factors, results may vary. A modern device will use several sources and methods to validate the current position, so spoofing positions may not be possible in all situations. To improve your chances to receive simulated GPS data, try:
- Turn off Wifi/BT/Cellular and positioning-enhancements (best airplane mode)
- Go inside, where the device loses GPS signal
- Reboot the device after doing the previous two steps
If the device runs Android, follow your attempts with GPS Test.
| Type | Make | Model | Locks on spoofed GPS? | GPS acts "jammed"? | Comments |
|---|---|---|---|---|---|
| Tablet | Samsung | Note 7 | No | Yes | |
| Phone | Samsung | S8 | Yes | No | WIFI must be off |
| Phone | Huawei | P30 lite | No | Yes | |
| Phone | Huawei | Mate 10 Pro | No | NO | 6 or 7 satelites: No fix |
| Smartwatch | Huawei | Amazfit Bip | Yes | No | |
| Phone | Apple | iPhone 6 | Yes | No | Works with WIFI on |
| Phone | ZTE | Axon 7 | Yes | No | Works with WIFI on |
| Phone | Xiaomi | Mi5 | Yes | No | Works with WIFI on |
| Phone | Samsung | S20+ 4G | Yes | No | WIFI must be off |
| Smartwatch | Samsung | Gear S3 WiFi | Yes | No | Location over GPS only |
https://blog.csdn.net/shukebeta008/article/details/103270214
- First steps
- Intended use and Legality
- Features
- Firmware update procedure
- Description of the hardware
- User interface
- Troubleshooting
-
Applications
- Receivers
- Transmitters
- ADS-B(S)
- APRS
- BHT Xy/EP
- GPS Sim
- Jammer
- Key Fob
- LGE Tool
- Morse
- Burger Pager
- POCSAG
- SSTV
- TEDI/LCR
- TouchTunes
- RDS
- OOK
- Soundboard
- Capture
- Replay
- Calls
- Scanner
-
Tools
- Freq manager
- File manager
- Signal gen
- Wave viewer
- Antenna length
- Wipe SD card
- Options
- Audio
- Radio
- Interface
- Date/Time
- Touchscreen
- Debug
- Memory
- SD Card
- Peripherals
- Temperature
- Buttons Test
- HackRF
- Compile From Source
- Description of the Structure
-
Software Dev Guides
- Create a Simple App
- Widgets
- SD Card
- Access Radio Hardware
- Create a Complex App
- Debug via SWD
- Tools
- Research
- UI Screenshots