Skip to content

Loading samples

Roger Klaveness edited this page Nov 5, 2026 · 4 revisions

Loading samples

Samples can be loaded from files, with or without a sampler connected.

Loading files

Press LOAD FILE on the panel, or LOAD WAV / QD in the SAMPLE view, and pick one or more files. These load:

  • WAV files, with the loop from the file if it has one (the smpl chunk other programs write). A WAV file saved from Axs7 also brings back its START and END, scan mode, sound, and its slot and key ranges.
  • Other audio files the browser can read, such as MP3, OGG or FLAC.
  • The sampler's QuickDisk images (.qd), as the HxC floppy emulator and FlashFloppy on a Gotek use them. A disk holds one sample with its settings: it loads with its points, scan mode, rate, sound and key ranges, marked FROM THE SAMPLER, just as if it had been received.
  • S612 disk images (.qd). The S612 has no programs, so as the sampler does, Axs7 gives its sample a program of its own, keys C1 to C6. Its start, end and loop aren't read yet, so it loads as a one shot of the whole memory.

The load settings and the samples in memory

Load settings

The three settings next to the button decide what happens to a loaded file.

RATE ON LOAD

  • SAMPLER (the default) resamples a file to the nearest of the sampler's rates, so it plays the same here and on the sampler.
  • KEEP keeps the file's own rate. It is resampled when sent.

A loaded file is also normalized: the part between START and END brought to full level. Both are edits that can be changed or undone later, see Editing samples. A WAV file saved from Axs7 and a disk image load as they were, without these.

LOAD SLOT: which slot of the current bank the sample goes in, as when the sampler loads a disk.

  • FILE: the slot it was saved from. A WAV file saved from Axs7 knows its slot, other files don't, and then the first free slot is used. If none is free, the sample is in no bank.
  • 1, 2, 3 …: that slot. With several files, the next ones go in the slots after it.
  • OFF: in no bank, only into memory.

A sample that was in that slot of the bank before is put in no bank. It stays in memory with its keygroups, see Banks and memory.

LOAD PROG: which of the file's key ranges the sample keeps, as on the sampler.

  • ALL (the sampler's Pall): all of them.
  • P1 … P32: only the one in that program, if the file has one there. A sample in P1 and P3, loaded with P2, is in no program.
  • NONE (the sampler's P**): none.

A sample that ends up in no program is put in the current program across the whole keyboard if that program is empty, so you can play it right away. Otherwise use ADD TO PROGRAM, see Programs and keygroups.

The MIDI log says where each file went:

STRINGS.wav: in slot 2 of BANK 1, in no program
KICK.wav: in slot 6 of BANK 1, in P5; HIT, in that slot before, is in no bank now
PAD TAKE.wav: in no bank

The sample list

The list shows every sample in memory. Click one to select it for editing.

Column
RATE The sample rate. 44.1K! means it isn't one of the sampler's rates: it will be resampled when sent.
LENGTH The part that plays, START to END. 1.70S! means the sampler can't take it whole. See Editing samples.
LOOP The scan mode: ONE (one shot), LOOP, ALT (alternating) or DRUM (drum trigger). ◀ in front means it plays in reverse.
SLOT Its bank and slot: B1 S03, or – S03 when it is in no bank.

The SAMPLER box under the list shows the selected sample's BANK and SLOT, and changes them. The slot list shows which sample is in each slot of that bank: choosing a taken slot puts that sample in no bank. Changing the bank takes the sample's keygroups along. SEND TO SLOT n sends it there, see Sending samples.

The PROGRAMS box under it lists the programs the sample has keygroups in, with their key ranges. Click one to open it in the PROGRAM view. A sample in no bank keeps its keygroups, and they are listed too, though no program plays them until the sample is in a bank again. See Programs and keygroups.

There is no limit like the sampler's memory: only the browser's.

Next

Clone this wiki locally