This is an Arduino library for HD44780 LCD display, operated in 4 bit mode over I2C bus with 8-bit I/O expander PCF8574

advanced u-boot (for sunxi Orange Pi Zero | Zero Plus2 h3 | R1, and another sunxi boards ), ready for full load linux from spi-flash, i2c display, FEL mode, and many other improvement

Golang library to interact with liquid-crystal display driven by Hitachi HD44780 IC via I2C-bus driver from Raspberry PI.

A very tiny Reddit client that runs on a 0.96 inch OLED screen with a Raspberry Pi

A controller for the display and fan of the Raspi PoE HAT (Type B)

ssd1306 i2c implementation for stm32f103 cortex-m3

Library for the LiquidCrystal LCD display connect I2C bus to an ESP8266 or Arduino board

Micropython package to control HD44780 LCD displays 1602 and 2004 via I2C

Python library to enable 128x32 pixel OLED for Raspberry Pi (both 32 and 64bit).

Add-ons for Home Assistant, allow you to extend the functionality around your Home Assistant setup.

A collection of progress bars for use with esp8266 and esp32's on OLED displays

All files you need to build a F3x Balance CG

GPS Tracking Device using SMS - GPS Module connected to STM32F4 Eval Board - LCD Display interfaced via I2C bus

OpenSprinkler status display -- a Raspberry Pi, I2C LCD, MQTT enabled display.

C++ i2c LCD display library for Linux devices using the i2c device nodes based on "New LiquidCrystal" library

A fast driver for LCD displays on the I2C bus for Pi Pico and Arduino

Dynamic Passenger Information system with multiple displays for Model Railroad Stations controlled by Rocrail, Node-RED or other sources.

Three button Morse code writer built on Arduino

ROS2 node that publish text on a LCD display. Supported displays LCD1604 + LCD2004 displays

Library for i2c manipulation in Rust. Designed for OLED displays on Raspberry PI [paused dev because my screen is broken]