A senior design project using distributed networking, sensors, and GPS positioning to correlate multiple wearable units' sensors, relative location and heading.
-
Updated
Mar 9, 2017 - Python
A senior design project using distributed networking, sensors, and GPS positioning to correlate multiple wearable units' sensors, relative location and heading.
Python project for 3d quadratic (quadric) curve fitting
We have small magnetometers that we want to look at and read out properly.
Searches satellite magnetometer data for Interplanetary Field Enhancements
Autonomous Robot built using cheap sensors and Raspberry Pi
Guide to connect GY-85 (IMU module) with Raspberry Pi 3b+
Calibration procedure for the MPU9250's accelerometer, gyroscope, and magnetometer using Python and a Raspberry Pi Computer
Tilt-compensated compass for the Adafruit CLUE implemented in CircuitPython
Load and Plot ACE satelite magnetometer data
Dead reckoning navigation using a smartphone magnetometer.
Python Toolkit for interfacing with the Varisense VMU931.
An IoT device that helps to teach you proper table tennis swing types!
MPU6050/9250 I2C and SPI interface. Sensor fusion using a complementary filter yields sensor Euler angles and is implemented in five different languages.
Everything about the KAI controller 🤳🏻. The Kai polls for data from the Gyroscope, Accelerometer, and Magnetometer built into it. Once it detects a gesture / needs to send data, it sends it using the Bluetooth Low Energy (BLE) protocol of the Bluetooth 4.0 spec 🦉
UAF Geophysical Institute magnetometer network data read and plot
Community developed SDK around the Python bindings for the C++ SDK
Add a description, image, and links to the magnetometer topic page so that developers can more easily learn about it.
To associate your repository with the magnetometer topic, visit your repo's landing page and select "manage topics."