Cameras Forward camera SV3C

Home › Home Assistant › Cameras

Cameras › Forward camera (SV3C)

SV3C PoE camera (forward deck): Off / On / Sentry modes, motion → photo burst, a timed snapshot every 5 min in Sentry, reboot and clock-sync buttons. Also: IR lamp, autofocus and wiper switches.

How to get there

HA → Sisu → Cameras (mode) or Settings → Devices → Forward Camera (reboot / set time) · camera 192.168.0.33 (MAC F0:00:00:40:4E:96, role swapped)

What it does

Choose Mode: Off (no stream), On (live stream), Sentry (motion → burst + timed snapshots); Reinit after a power cycle reloads ONVIF and sets the clock; Reboot restarts the camera; Set system date and time syncs its clock.

Before you start

Camera powered on the PoE switch

What you should see

Mode shows the choice; stream live when reachable; last snapshot summary names the trigger and time. While the camera is offline no snapshot is taken and the last-snapshot time does not move. Reinit reloads ONVIF, waits until the stream is back, then sets the clock.