Water Autorun watermaker controls

Home › Home Assistant › Water

Water › Autorun & watermaker controls

Run the watermaker from HA: choose litres or hours, set the amount, auto-stop when tanks are full, and start/stop/flush buttons.

How to get there

HA → Water → section Autorun · http://192.168.0.20:8123/lovelace-water/main

What it does

Autorun (smart) starts a run sized to the tank shortfall (or 400 L); Autorun runs the set amount; Stop stops; Freshwater flush / Cancel flush control the fresh-water flush. ⚠️ Real machine — every start/stop ends with a fresh-water flush.

Before you start

Spectra reachable at.25, sea cock open, someone aboard

What you should see

Recommended litres shown (e.g. 400 L); after a start the status tiles switch to running within a minute; after stop, a flush follows.