Helm Anchor watch

Home › Home Assistant › Helm

Helm › Anchor watch

Anchor watch: arm the alarm, set the drop point, radius and breach delay, see distance/bearing to the drop and both positions on a map.

How to get there

HA → Helm → section Anchor · http://192.168.0.20:8123/lovelace-helm/main

What it does

Set here → stores the current position as the anchor drop; Apply suggested radius → copies the suggested radius; change Radius / Breach delay; toggle Alarm enable → arms/disarms. Drag outside the radius for longer than the delay → alarm + phone notification.

Before you start

GPS fix from the NMEA gateway

What you should see

Disarmed: alarm off, distance unavailable. Armed after Set here: distance/bearing live, map shows boat and drop; alarm turns on only past radius + delay.