Skip to content

Marine Board USB C Reset Boot

github-actions[bot] edited this page Sep 29, 2026 · 5 revisions

Home › Marine Board hardware › Marine Board

Marine Board › USB-C, Reset & Boot

USB-C (J1) for flashing, serial logs and 5 V logic power; Reset and Boot buttons for recovery.

Marine Board › USB-C, Reset & Boot

How to get there

Connector J1 and the two push buttons

What it does

Hold Boot, tap Reset to enter download mode; flash with ESPHome.

What you should see

Board enumerates as a USB serial device; logs stream at boot. RGB status LED (D5): alternators blue idle / green charging / amber warning / red fault / purple shadow; levels green flash = OK, blue = HA API down; freezer cyan = compressor on. Status LED brightness number in HA. Schematic shown: status LEDs, Reset/Boot buttons and buzzer.

Clone this wiki locally