Skip to content

Marine Board Power input CN1

github-actions[bot] edited this page Sep 29, 2026 · 4 revisions

Home › Marine Board hardware › Marine Board

Marine Board › Power input (CN1)

12 V battery in on CN1 (GND, +12V BAT) through reverse diode, fuse F1 (2 A), SMBJ18A TVS and filter; USB-C powers logic/programming only.

Marine Board › Power input (CN1)

How to get there

Connector CN1 on the board edge

What it does

Wire battery + and GND; 9–15 V DC.

What you should see

3.3 V logic up; relay/PWM/4–20 mA only work with 12 V (not USB). Schematic shown: the 5 V → 3.3 V stage (SY8089).

Clone this wiki locally