Repository navigation
LED Colour Indications
This is a guide to what different colours mean on the controller.
There are normal state LEDs that you should expect using the controller normally.
There are also special states where the controller is usually not running, most likely because of firmware flashing
Red - Lights up when there is enough pressure to send a MIDI note in combination with the green LED, increases brightness as more pressure is applied
Green - Position detected on the SoftPot Ribbon
Blue (Fading) - The OLED screen is sleeping, the controller has blanked the OLED to reduce the amount of burn in. The controller can still be activated at any time
Purple - The controller is in a menu and will not play any notes. Leave the menu to resume normal function.
Dim White - The controller is in BOOT/DFU mode. This is either because you have put the controller in BOOT/DFU mode or there is no firmware on the controller. Press RESET to exit BOOT/DFU mode or if there is no firmware/faulty firmware, flash the latest firmware from the releases page following this guide
Bright White - The controller is in a buggy state most likely occurred after flashing firmware. Unplug the controller from power and reconnect to fix this state