Skip to content

Expansions

WacKEDmaN edited this page Nov 6, 2026 · 3 revisions

Expansions

Fit expansions in the Expansions menu or in Window → Settings → Expansions. Most of them need a reset to start; the program does that for you when you fit them.

Expansion Page or section
M4 Board (SD card, WiFi) M4 Board
Symbiface II, SYMBiFACE III, X-MASS SYMBiFACE II and III
Albireo (CH376: SD card, USB) below
GFX9000 (Yamaha V9990) and Video9000 GFX9000
Multiface II below
RS232C serial interface below
Dobbertin HD20 hard disc below
Printer port: printers and DACs below
PlayCity below
OPL4 sound card below
Speech: SSA-1, dk'tronics, LambdaSpeak 3 below
RAM boards Machines and ROMs
Expansion ROMs Machines and ROMs
Mouse interfaces, lightguns Keyboard, joysticks and mice

Albireo

The Albireo board has a CH376 chip with an SD card and a USB port. You can fit two boards.

  • Fit them with Expansions → Albireo (USB, SD), or in Window → Settings → Expansions.
  • Albireo 1 is at &FE80. Albireo 2 is at &FE40 (the board with JP2/JP3 cut).
  • SD card: a folder on your PC. The CPC sees it as one FAT16 disc. What the CPC writes goes back into the folder. The default folder for board 1 is albireo-sd next to the program.
  • USB port: no device, a USB stick (a folder, as one FAT16 disc; default albireo-usb) or a USB mouse (your PC's mouse, for SymbOS and FutureOS).
  • UniDOS with its Albireo node finds the board at boot. Put UniDOS in a ROM slot below AMSDOS (7). SAVE and LOAD work on the card.
  • An Albireo 2.0 has no interrupt line: the software polls the chip.

Albireo 1.1: the serial link

Tick Serial link (Albireo 1.1) under Albireo 1 (in the menu: Albireo 1.1: serial link (&FEB0)). The board then has an SC16C650B UART at &FEB0-&FEB7 with a USB serial link to another computer (up to 1.5 Mbaud), and its interrupts.

  • Far end: nothing, Listen on a port, Connect to host:port, a Serial port of your PC, or a Loopback plug. For a program on your PC that opens a COM port, use a virtual serial port pair (for example com0com) and give one of its ports here.
  • Interrupts: the UART's interrupt goes to the CPC's INT when MCR bit 2 (OUT1) is 0, and to NMI when MCR bit 3 (OUT2) is 0. The modem status register has the CRTC CURSOR signal (bit 2), the CH376's interrupt (bit 3), the far end's DTR (bit 1) and CTS (bit 0).
  • DIP switches: S1 the CH376's interrupt, S2 the CH376 reset with the CPC, S3 the far end's DTR resets the CPC, S4 the far end's DTR as an interrupt. The default is S1 and S2 on.
  • The manual's test program 16c650.bas runs: with a loopback plug, what the CPC sends comes back.
  • On the command line: --albireo <folder> and --albireo-usb <folder|mouse|none> for board 1, --albireo2 and --albireo2-usb for board 2 (refer to Command line).

Multiface II

Romantic Robot's freezer.

  • Fit it with Expansions → Multiface II.
  • F10 (or Multiface II: STOP) is its STOP button. Its menu, save and reload work.
  • Its ROM is not included. Put a file with multiface in its name in the roms folder.

RS232C serial interface

The Amstrad RS232C (and Pace) card: a Z80 DART at &FADC to &FADF and an 8253 at &FBDC to &FBDF.

The line can be:

Line What it is
Listen on a port Another program connects to this computer's port, for example telnet localhost 2323
Connect to host:port A TCP connection out, for example to a BBS or a telnet server
Serial port One of your computer's serial ports (COM3, /dev/ttyUSB0)
Loopback plug TXD to RXD, RTS to CTS, DTR to DCD
  • Accept other computers: a listening port can be reached from your network. Off: only from this computer.
  • Reconnect opens the line again.
  • The card's ROM is not included. Put it in an expansion ROM slot if the software needs it.

Dobbertin HD20 hard disc

A 21 MB hard disc (614 cylinders, 4 heads, 17 sectors) on SASI ports &FBE0 to &FBE4.

  1. Expansions → Dobbertin HD20 (hard disc) → Image...: choose the image file (.img). Remove the image takes it out.
  2. Put the X-DDOS 2.10 ROM in an expansion ROM slot. X-DDOS gives the hard disc drives (D: and on).

With no image set, an SF3 USB stick's HD20\HD20_01.IMG is used, when a SYMBiFACE III is fitted.

The printer port

Expansions → Printer port:

Choice What it is
Nothing No device
Text printer The printed text, in the Printer window
Dot-matrix printer The printed pages as pictures, with the Epson graphics codes
DigiBlaster An 8-bit DAC on the printer port
AmDrum The Cheetah AmDrum DAC

Show printer output opens the Printer window. Refer to Cheats, graphics finder and printer.

PlayCity

TotO's PlayCity: two YMZ294 chips (six more AY channels, in stereo, one chip on each side) and a Z80 CTC for raster NMIs and IM2 timer interrupts, at &F880 to &F988. Fit it with Expansions → PlayCity.

OPL4 sound card

A MoonSound-style OPL4 (YMF278B) on the AMSDAP at &FFC4 and &FF7E: 18 FM channels and 24 wavetable channels. SymbOS and SymAmp use it for FM, MOD and wavetable music.

  • Sample RAM: choose the size of its sample RAM.
  • The General MIDI instruments need Yamaha's YRW801 sample ROM. It is not included. Get it... asks for the file. Without it, the GM instruments are silent, and the other sounds work.

Speech

Expansions → Speech synthesiser:

Choice What it is
No speech synthesiser
Amstrad SSA-1 (&FBEE) The SP0256-AL2 speech chip
dk'tronics (&FBFE) The SP0256-AL2 speech chip
LambdaSpeak 3 + MP3 module The LambdaSpeak 3
  • The SSA-1 and dk'tronics need the SP0256-AL2 ROM (sp0256-al2.bin, 2 KB). It is not included. The program asks for it; without it the chip is silent.
  • LambdaSpeak 3: its Epson and DECtalk speech uses the voices of your computer: the Windows voices, say on macOS, espeak-ng on Linux.
  • MP3 card folder...: the micro-SD card of the LambdaSpeak 3's Catalex MP3 module. It has folders 01, 02, ... of files named 001xxx.mp3, 002xxx.mp3, ... LambdaSpeak 3's MP3.BAS plays them.

Clone this wiki locally