Skip to content
WacKEDmaN edited this page Oct 31, 2026 · 1 revision

Tapes

The CPC 464 and 464 Plus have a tape deck. The other models use an external deck. The emulator has one deck for all models.

The tape deck

Use the Tape window or Media → Tape.

Control What it does
Insert tape... Puts a .cdt, .tzx, .tap or .wav tape in the deck
` <`
<< Rewind a block
Play Presses PLAY
Rec Presses RECORD (and PLAY)
Pause Pauses the tape
Stop Stops the tape
>> Fast forward to the next block
Eject Takes the tape out
0 Sets the counter to 0
New blank tape Puts an empty tape in the deck, to record onto
Save tape as... Writes the tape to a .cdt file

The window also shows the counter, the time and the block, and a list of the blocks. A click on a block in the list moves the tape there.

When you load a tape and type RUN" and Enter, the deck presses PLAY for you and answers "Press PLAY then any key". The cassette motor relay of the CPC still decides when the tape moves, as on a real CPC.

On a 664 or 6128, type |TAPE first, so that the firmware reads the tape and not the disc.

Loading speed

These settings are in the Tape window and in Media → Tape.

  • Follow the motor relay: the tape moves only while the CPC's motor relay is on (as a real deck). Relay start-up delay is the time the motor takes to start.
  • Fast loading (firmware blocks) (on by default): the blocks that the CPC firmware reads play at the speed you set, from 1000 to 3500 baud (default 3000). A block plays fast only when it is in the firmware's format and the firmware reads it. A block that a custom or protected loader reads plays at its own speed. The list of blocks shows the decision for each block.
  • Instant loading (firmware blocks) (off by default): when the firmware reads a block, its bytes go into memory at once, with no wait, no border stripes and no tape sound. Other blocks play as they are. This works with the OS ROMs of the 464, 664, 6128 and the Plus.
  • Turbo loading: while the tape moves, the whole CPC runs faster, up to 20 times, or as fast as your computer can. All loaders work, protected loaders too, because the CPC sees no difference.

Recording

  • Rec records the output of SAVE onto the tape, from the current position.
  • New blank tape puts an empty tape in the deck first.
  • The firmware's format becomes standard turbo blocks (TZX block &11). Other signals stay as the raw signal.
  • Save tape as... writes the tape to a .cdt file. A recording on a .cdt file that you loaded goes back into that file when Media → Save disc and tape writes to their files is on.

On the command line, --record-tape <file.cdt> puts a blank tape in the deck and starts to record; at the end the tape is saved in that file.

Formats

Format Notes
.cdt, .tzx TZX 1.20, all block types used by CPC software
.tap Raw tape blocks
.wav An audio recording of a tape; the emulator decodes it with a Schmitt trigger, as the CPC's input does

Clone this wiki locally