Skip to content

SYMBiFACE II and III

WacKEDmaN edited this page Oct 31, 2026 · 1 revision

SYMBiFACE II and III

Choose the interface in Expansions → Symbiface / X-MASS:

Choice What it is
Off No interface
Symbiface II PS/2 mouse, real-time clock, IDE/CF
SYMBiFACE III (SF3) USB mouse, real-time clock, IDE/CF, sound card, USB stick, SD card, WiFi, OLED
X-MASS The IDE/CF interface alone, at &FD08 to &FD0F

The mouse

Click the picture to give the PC mouse to the Symbiface's mouse. F12 or the middle mouse button gives it back. While a Symbiface is fitted, the other mouse interfaces are off.

The clock

The real-time clock gives the PC's date and time.

The IDE drive

  • IDE folder...: the IDE/CF drive is a folder on your PC: symide beside the program by default.
  • SymbOS reads and writes it as one FAT16 partition. What SymbOS writes goes back into the folder.
  • Rescan IDE folder reads the folder again after you change files in it outside the emulator.

SYMBiFACE III

USB stick and SD card

  • SF3 USB stick folder...: the USB stick is a folder on your PC. It is drive 1: of the SE-ONE player and SymbOS's SF3 drive. What is written there goes back into the folder.
  • SF3 SD card folder...: the SD card is a folder on your PC (SF3SD beside the program by default). It is drive 0: and holds the SF3's system files (samples, speech, ROM banks).
  • If the M4 or the IDE uses the same folder, write to it from only one of them.

ROM banks and boot ROMs

The SD card's CPC\ROMTABLE\BANKnnn folders hold ROM banks, as on the real card. In a bank, ROMnnn.BIN goes into ROM slot nnn, and ROM127.BIN is the lower ROM (the OS).

  • SF3 ROM bank: Automatic uses the card's bank for the machine (bank 6 for a 464, bank 2 for a 664 or 6128, bank 3 for a Plus), or choose a bank by its number and name.
  • The ROMs of the bank are fitted at the next reset. Their start-up messages show when the machine starts, as on a real CPC with the SF3.
  • ROM 7 is used only when ROM7_ENA=ON is in SF3_CPC.INI on the card.
  • The CubeMDOS ROM in the default banks makes D: (the USB stick) the current drive when no M4 is fitted. Type |A to use the floppy drive.

The sound card

The SE-ONE sound card at &FF20 to &FF27:

  • SymAmp plays MP3 files through it (as the MP3MSX interface), with volume, balance, bass, treble, mute and the spectrum bars.
  • TMTLOGIC's SE-ONE player (SEPLAYER.BAS): the file list, play, pause, stop, the progress, the VU meters and the error texts.
  • Samples (SAMPLER.BAS) and speech sounds (SE-TALK.BAS).
  • MIDI: SE-SYNTH.BAS and the EMR MIDI programs send their MIDI to your PC's MIDI output.
  • MP3 and WAV are decoded inside the emulator. AAC, AAC+, Ogg, WMA, M4A/MP4, FLAC and Opus need ffmpeg on your PC: on the PATH, or named with ffmpeg=<path> in cpcse.ini.

WiFi and web radio

  • The SF3's socket functions use your PC's network, with the same switch as the M4's WiFi.
  • Web radio works. TMTLOGIC's WEB-DK.BAS plays its station. That station sends AAC+, so it needs ffmpeg.

The other functions

  • |VER, the clock (|RSTIME, |RGTIME, |RSDATE, |RGDATE), the buzzer (|BUZZ) and the measurements.
  • The OLED display: Expansions → Symbiface → SF3 OLED display opens a window with what the CPC writes to the display. With nothing written, it shows the SF3's start screen.
  • SF3Monitor finds the card and reads its information.

Not emulated

Changing the ROM bank from the CPC (functions 62, 63, 66), the firmware update (DFU), MIDI files and the FM radio's sound. These functions answer with the SF3's error status and an error text, so a program reports the error and does not stop.

SymbOS

  • SymbOS for the M4 uses the M4's card. SymbOS for the Symbiface uses the IDE folder.
  • SymbOS for the GFX9000 sees the files on the SF3's IDE and USB stick.

Clone this wiki locally