Repository navigation
Snapshots Save Slots and Timeline
WacKEDmaN edited this page Nov 7, 2026
·
2 revisions
A snapshot is the whole machine in one file: the memory, the Z80, the chips.
-
Load: drop a
.snafile on the window, or use the Snapshot window or Media → Snapshot → Load .SNA.... - Save: Save .SNA... in the same places, or File → Save snapshot....
- Eject (in the Snapshot window) lets the snapshot go: the machine starts again.
Each program has nine save slots.
- Ctrl+1 to Ctrl+9 load slot 1 to 9. Ctrl+Shift+1 to Ctrl+Shift+9 save slot 1 to 9.
- File → Quick save and File → Quick load have the slots too.
- The Snapshot window shows each slot as a picture. Save and Load under each; double-click a picture to load it.
- Each slot is a
.snafile and a picture instates/<program>/beside the emulator, so the slots stay from one session to the next.<program>is the name of the disc, tape, cartridge or snapshot loaded last. - File → Undo the last load gives back the machine as it was before the last slot or snapshot load.
The timeline keeps a snapshot of the machine every second, and every input since. Switch it on or off in the Machine window (Timeline: rewind (Ctrl+Left) and step back). It is on by default.
- Ctrl+Left goes one second back. Hold it to go on.
- In the debugger, Back (Shift+F7) goes one instruction back, Frame back one frame, Run back (Shift+F5) to the last breakpoint hit, and Last write to an address finds the instruction that last wrote it. Refer to Debugger.
- The snapshots are exact: from one, with the same inputs, the machine runs the same, instruction for instruction. Running on from a point in the past replays the inputs as they came.
- A reset, a change of the machine or its media, or an edit in the debugger starts the timeline again.
- The M4, OPL4, IDE, RS232C, speech, Albireo and HD20 cards are not rewound, nor what was written to a disc.
Machine → Movie records a run so that it can be played again exactly.
- Record from power-on: the machine is reset (the disc drives and the tape as at power-on). Then every key, joystick, mouse and tape button is recorded.
-
Stop and save... writes the movie to a
.cpcmoviefile. Stop (not saved) throws it away. - Play... plays a movie. Use the same machine and media as for the recording: it is then the same run. A check every second shows that the run stays in step, or where it went out of step.
- Stop playing ends the playback.
File → Save screenshot... saves the picture as a BMP file. The Snapshot window also has Screenshot .bmp.... For video, refer to Recording.
Start
The machine
Media
Expansions
Tools
Automation
Help