Skip to content

Troubleshooting and Crash Reports

WacKEDmaN edited this page Oct 31, 2026 · 1 revision

Troubleshooting and crash reports

If the program crashes

The program does not just close. It writes a crash report and shows a message box with the report's name.

  • The report is crash-<date>-<time>-<number>.txt, in the program's home folder (beside cpcse.ini; refer to Settings, files and folders).
  • It says what went wrong (for example an access violation, a stack overflow or an exception nobody caught), where in the program, and what the emulator was doing: the machine, the PC, the discs, the tape, the cartridge and the status line.
  • Please open an issue and attach the report. Say what you were doing.

Common problems

A disc does not load ("not found")

  • With an M4 Board fitted, the SD card is the current drive at start. Type |DISC before you load from the floppy.
  • With a SYMBiFACE III and no M4, its CubeMDOS ROM makes D: (the USB stick) the current drive. Type |A to go back to the floppy.
  • A disc in a big format (80 tracks, double-sided, ROMDOS) needs a DOS such as ParaDOS in ROM 7 (ROMs window). AMSDOS gives "read fail" on these discs, as on a real CPC.
  • On a 464, there is no disc drive: choose a 664, 6128 or Plus.

A tape does not load

  • On a 664 or 6128, type |TAPE before RUN".
  • If a protected loader fails with Instant loading, switch instant loading off. Turbo loading works with all loaders.

The program says a ROM is missing

Some devices need a ROM that is not included (OPL4 YRW801, SP0256-AL2, Multiface II, RS232C). The program asks for the file; choose it on your computer. Refer to Installation and first start.

No sound from AAC web radio or Ogg files

Install ffmpeg and put it on the PATH, or name it with ffmpeg=<path> in cpcse.ini.

The keys do not go to the CPC

A tool window (debugger, assembler, BASIC, DSK editor) has the focus. Click the Screen window.

The cursor keys move a joystick

Input → Arrow keys as joystick is on. Switch it off to use them as the CPC's cursor keys.

The mouse is stuck in the window

The CPC's mouse has it. Press F12 or the middle mouse button.

The windows are in a mess

Window → Reset layout.

A program assembles slowly

The assembler runs in the main window. A source with very large loops (repeat with a big count) can take some seconds; the window does not answer meanwhile. RASM stops endless loops itself.

Known issues

  • SymAmp under SymbOS: SA2 songs for 60 Hz or 70 Hz that set their speed in the pattern play about 1.4 times too slowly. The cause is SymAmp's player, not the emulator: a real CPC plays them at the same speed. For MP3 playback, fit a SYMBiFACE III.
  • LambdaSpeak 3 in its Amdrum mode takes all &FFxx ports. In that mode, the SYMBiFACE III's sound card does not answer.
  • GFX9000: tests on real hardware show that some commands sometimes fail; the emulator does not do this. The colour order of LMMV with DIX=1 is approximate.
  • WinAPE syntax: checksum, memory(), and the output files of write and save are not supported.

Report a problem

Open an issue with:

  • the version (Help → About);
  • the machine and the expansions;
  • the file that shows the problem, or where to get it;
  • what you did, what you saw, and what you expected;
  • the crash report, if there is one.

Clone this wiki locally