Skip to content

292 YAACWK Hardware

k3ng edited this page Oct 16, 2026 · 1 revision

YAACWK Hardware

YAACWK ("Yet Another Arduino CW Keyer") is a full-featured, dedicated keyer board designed by Federico Pietro Briata, IZ1GLG, built around the ATmega644P rather than a stock Uno/Nano/Mega. See http://i1cra.briata.org/yaacwk/ for the hardware itself (also referenced in Kits and Kitting).

To compile for it, uncomment HARDWARE_YAACWK in keyer_hardware.h and edit keyer_features_and_options_yaacwk.h, keyer_pin_settings_yaacwk.h, and keyer_settings_yaacwk.h.

Because the board is built around the 644P's own pinout rather than a standard Arduino board, pin numbers in the settings file look unusual (21, 22, 28, 31, 20, 23, 26, 12-15, etc.) - don't expect them to line up with an Uno/Nano/Mega's silkscreen numbering.

This is one of the most fully-loaded hardware profiles:

  • Buttons, Command Mode, Command Line Interface, memories with macros
  • Winkey 2 emulation, with OPTION_WINKEY_STRICT_HOST_OPEN and OPTION_WINKEY_FREQUENT_STATUS_REPORT enabled for RUMlog/RUMped compatibility
  • A speed potentiometer, set potentiometer_always_on with a faster-than-default check interval
  • A PS2 keyboard input
  • A 20x4 character LCD (most other profiles use a 16x2) - FEATURE_LCD_4BIT with LCD_COLUMNS 20 / LCD_ROWS 4
  • FEATURE_CW_DECODER using the Goertzel audio detector (OPTION_CW_DECODER_GOERTZEL_AUDIO_DETECTOR) - decodes CW from an audio input rather than from the keying line
  • 8 analog buttons (analog_buttons_number_of_buttons 8, vs. the typical 4)
  • OPTION_CW_KEYBOARD_ITALIAN for an Italian keyboard layout
  • FEATURE_ALPHABET_SEND_PRACTICE

Clone this wiki locally