Skip to content

298 YCCC SO2R Mini Hardware

k3ng edited this page Oct 16, 2026 · 1 revision

YCCC SO2R Mini Hardware

This profile is a true SO2R (Single Operator Two Radio) controller-box build, distinct from the simpler two-TX-line Mortty SO2R variants - it enables FEATURE_SO2R_BASE, the SO2R Box base protocol extensions, with FEATURE_SO2R_SWITCHES (SO2R box TX/RX switches) and FEATURE_SO2R_ANTENNA available as additional (commented-out) options.

To compile for it, uncomment HARDWARE_YCCC_SO2R_MINI in keyer_hardware.h and edit keyer_features_and_options_yccc_so2r_mini.h, keyer_pin_settings_yccc_so2r_mini.h, and keyer_settings_yccc_so2r_mini.h.

Notable pins: paddle_left=6, paddle_right=7, two independent TX key lines (5, 4) and two independent PTT lines (3, 2) for radio 1 / radio 2, plus dedicated SO2R routing outputs - so2r_tx_2 (radio-2-transmitter-selected), so2r_rx_2s and so2r_rx_s (receiver/stereo selection outputs) - and, if FEATURE_SO2R_SWITCHES is enabled, analog switch-sense inputs so2r_tx_switch, so2r_rx1_switch, and so2r_rx2_switch. An external-PTT-sense ptt_input_pin is also wired (most other profiles leave this disabled).

The settings file builds a device-name string (e.g. "SO2R Mini", "SO2R Mini P/S/A") reported to host software, reflecting which of the Potentiometer/Switches/Antenna feature combination is compiled in, and includes a baud-rate option for UcxLog compatibility (OPTION_WINKEY_UCXLOG_9600_BAUD).

Clone this wiki locally