Skip to content

296 OpenCWKeyer MK2 Hardware

k3ng edited this page Oct 16, 2026 · 1 revision

OpenCWKeyer MK2 Hardware

OpenCWKeyer MK2 is OK1CDJ's design - https://github.com/ok1cdj/OpenCWKeyerMK2. This is also the hardware behind the "Open CW Keyer" kit sold by Hamshop (linked from the wiki home page).

To compile for it, uncomment HARDWARE_OPENCWKEYER_MK2 in keyer_hardware.h and edit keyer_features_and_options_opencwkeyer_mk2.h, keyer_pin_settings_opencwkeyer_mk2.h, and keyer_settings_opencwkeyer_mk2.h.

It's Uno/Nano-class, with a pin layout close to the stock Mortty: paddle_left=2, paddle_right=6 (note: 6, not 5 as on the Mortty), tx_key_line_1=11, ptt_tx_1=12, sidetone=4, potentiometer=A0, buttons=A1. Only a single TX key line/PTT line is supported (no second radio) and there is no LCD.

Enabled features: buttons, command mode, memories, Winkey 2 emulation, and the potentiometer - essentially a minimal single-radio Winkey-emulator build similar to the base Mortty profile, but with buttons/command mode/memories added (CLI is disabled by default). The settings file sets initial speed to 25 WPM and a wider potentiometer range (initial_pot_wpm_high_value 40 vs. the usual 35), and 3 analog buttons.

Clone this wiki locally