Skip to content

Linear AVM Corollaries

mister-mayflower edited this page Nov 9, 2026 · 3 revisions

These are consequences of the linear AVM specification, not additional operating rules. They use exact arithmetic and exclude fees, advances, floor changes, and external exchange-rate movements unless stated.

Price impact on a single linear segment

For a segment with slope $s\ge0$, starting price $p_0$, and positive quantity $n$, moving forward by $n$ changes the price by $sn$ and costs

$$C=n\left(p_0+\frac{sn}{2}\right).$$

The average price is $p_0+sn/2$. A sale moving backward by $n$ has gross average price $p_0-sn/2$, provided it stays on that segment. Cross-segment sales require summing separate integrals.

In the AVM, ordinary purchases begin on main, whose slope is $m$. Redemptions can cross the ramp, whose slope is $a\gt m$, and floor, whose slope is zero. The ramp's larger slope describes greater price sensitivity per AVA within that interval; it does not guarantee higher returns or measure statistical volatility.

Cost to double a positive price

On an unchanged linear segment with slope $s\gt 0$ and starting price $p_0\gt 0$, reaching $2p_0$ requires $n=p_0/s$. The cost is

$$K=\frac{3p_0^2}{2s},\qquad s=\frac{3p_0^2}{2K}.$$

For ordinary issuance, use $s=m$ and the current main price for $p_0$. For example, $p_0=0.1$ and $K=100$ imply $m=0.00015$ and $n=666.\overline6$. These values concern movement along that unchanged main line; they do not calibrate every later market state automatically.

Price multiplier versus capital

Starting at $p_0$ on the same unchanged line, capital inflow $C$ yields spot price $p_1$ satisfying

$$p_1^2=p_0^2+2sC.$$

Using the cost-to-double $K$ above,

$$\frac{p_1}{p_0}=\sqrt{1+\frac{3C}{K}},\qquad \frac CK=\frac{(p_1/p_0)^2-1}{3}.$$
Spot-price multiplier Required $C/K$
$2$ $1$
$5$ $8$
$10$ $33$
$50$ $833$
$100$ $3333$

These are spot-price multipliers, not realized investment returns. A buyer pays an average fill price and a seller receives an average fill price; both can differ from the marginal spot quote. Fees and subsequent state changes further affect returns.

Ramp geometry

For a given endpoint, the ramp lies below main before their intersection. Its purpose in floor raising is to provide a lower-area transition that can replace part of main while maintaining the endpoint price.

This is not an early-buyer ramp: launch has zero ramp width, and after every accepted ordinary redemption the next purchase begins on main. Applying the ramp's slope to estimate ordinary buy-driven returns would describe a path the market does not take.

Maximum constant-backing floor

There is no universal floor-to-spot percentage. The bound depends on existing geometry and on both circulation and progress. The complete derivation is in Linear AVM Floor Raising.

For the special unraised state with $A=E=0$, $T=P$, and $F=b$, main slope $m$ and ramp multiplier $k=a/m$ give

$$F_{\max}=b+mP\left(\sqrt{k(k-1)}-(k-1)\right).$$

At $k=2$, the increase above $b$ is approximately $0.4142mP$. The fraction of the full spot price $mP+b$ depends on $b$ as well. Prior floor operations require the general state-dependent expression.

Floor backing is finite

The floor component is $FT$ in the exact backing decomposition. It supports a minimum gross reserve claim, subject to collateral obligations. Special price-preserving floor redemption is limited by the physical floor tail $J=T-P+A$ and available liquid reserve. A zero slope is not infinite capital or an unlimited withdrawal right.

Clone this wiki locally