Repository navigation
On the Vision Pro
Every game AVP Play installs is an app of its own on the Vision Pro. You find it on the Home View like any other app.
When you open a game, a window with the game's picture and name appears first.

- Start – starts the game. The window closes once the game is running.
- Settings – this game's settings (see below).
- Measure room – set up your play area (see Play area). Greyed out when the play area is set to Stationary or Off.
- Play area – Room scale, Stationary or Off, and At the edge – Wall or Fade out. Right under Start, without going into the settings (see Play area).
- Bottom right: the version of the game and of the toolchain.

On the first start many games prepare their graphics ("Preparing graphics: X of Y"). That takes a few minutes the first time and only seconds after that. Just wait – the game then starts by itself.
Quitting a game: Press the Digital Crown. The game ends itself shortly after. The next time you open it, it starts fresh – there is no pausing and resuming in the background.
Showing your room (progressive immersion, since AVP Play 1.10.15): A game's settings have a box called Progressive (Digital Crown). Turn on Progressive immersion there and start the game. When you now turn the Digital Crown, the game shrinks into a window over your room. At 0 % you only see the room, and the sound fades out. Turn back and both return. Afterwards a note asks you to tap your fingers together briefly – then the controllers respond again. The switch is separate for every game and starts off. Mixed-reality games do not have it; there you see your room anyway.
Changing settings: Most settings apply from the next start. So: quit the game, open it, change Settings, Start.
Each game has its own settings. What you set in Beat Saber doesn't apply to Walkabout.

Controller Type: Standard Controllers (PlayStation VR2 Sense controllers, game controllers and hands) or Surreal Touch. Choose before starting. The choice applies to this game only.
- Foveated rendering – keeps the middle of the picture sharp and draws the edges more coarsely. Games run more smoothly with it. Some games offer levels from Off to Very strong.
- Edge smoothing – smooths jagged edges (only in some games, e.g. Beat Saber from 1.45). Costs performance – then best lower the resolution a little.
- Resolution – how finely the game is drawn (50–100 %). If the picture stutters when you look around, lower it a little.
- MetalFX upscaling – on the Vision Pro it sits right below Resolution. Sharpens the picture when the resolution is below 100 %. Turning it on at 100 % sets the resolution to 75 %. Switching takes effect at once.
- Up to 100 (default) – the most stable. Where the game draws nothing, it is black.
- Up to 120 – smoother, where the game manages it.
When a game can't keep up, the Vision Pro halves the rate for a while (100 to 50, 120 to 60). Mixed-reality games don't have this choice.
For a game that draws fewer pictures than the display shows. The app makes the missing pictures from the game's last two, so motion looks smoother. Your head's movement stays as quick as before.
- Off – as before. The default in every game except Half-Life: Alyx.
- Ahead – where the game has no new picture, its last one is moved on to the moment it is shown.
- In between – the middle between the game's last two pictures. The smoothest; what the game draws comes 10 ms later. The default in Half-Life: Alyx.
Some games also draw how every part of their picture moved. AVP Play then uses that instead of guessing: so far HITMAN 3 VR: Reloaded, Assassin's Creed Nexus VR and LEGO Bricktales. Nothing to switch on – it happens by itself.
In-between pictures are only made while the Vision Pro runs its display at 100 Hz. Sometimes visionOS chooses 50 Hz by itself; the game then looks as with Off.
While MetalFX upscaling is on, no pictures are made – the setting says so. Mixed-reality games have this choice too.
With the performance panel shown (hold Create and Options together for a second), a short tap of the two cycles Off, Ahead and In between, so you can compare. The big number on the panel is then what you see, generated pictures included.
Show my real hands over the game – normally off, because most games draw their own hands or controllers.
Shows whether an ordinary game controller (DualSense, Xbox) is connected. Pair it on the Vision Pro under Settings › Bluetooth. See Controls.

- Use a play area in this game – on or off
- Room scale or Stationary / seated
- Near the edge: Virtual wall, Fade out or Off
- Measure room
Everything about it is on the Play area page.
- Player name – for games that show a name (e.g. Demeo).
- Game language – which language the game starts in: like this Vision Pro, English or one of 21 others. A choice made here stays when the game is updated. The default for new games is set on the Mac under App settings.

Settings you don't need to play:
- Picture, in detail – including Display output (Light, Standard, Full): how finely the finished picture goes to the display. Light leaves the graphics chip more time for the game.
- Max resolution per eye – the largest picture size. Above the tested limit the game may stutter or not start.
- Passthrough and chroma key, Controller alignment – for tinkerers.
- Picture through RealityKit (proof of concept) – off by default. The picture is then sharp wherever you look, not only in the middle. But the game runs worse: fewer frames a second and a warmer headset. Only an experiment; it takes effect the next time the game starts. Not offered for mixed-reality games.
- Microphone – in games with voice chat.
- Test – switches for improvements that are built in but not yet on for everyone. Some are already on for single games (it says so). One of them: Show performance in the headset from the start; right below it you choose what a short tap of Create and Options does (Automatic, frame generation, MetalFX or nothing). If others hear your voice overdriven or crackling (Steam Link, Walkabout), try Microphone: no automatic gain or Microphone: unfiltered and send the log.
- Diagnostics – the game's log. Export log sends it, for example by AirDrop, to your Mac – useful when you report a problem. Record what the game waits for helps with games that get stuck on a loading screen.

- Unlock all putters and balls – unlocks every lost ball, the Foxhunt and activity putters and earned Homestar celebrations. Works only after the game has been started once. Cannot be undone (the app makes a backup first, though).
- Microphone – so others hear you in multiplayer voice chat. The Vision Pro asks for permission once.
The page has five boxes:
- Steam Cloud – sign in with your Steam account here in the game so your saved games are kept in step with Steam. You confirm the sign-in in the Steam app on your phone.
- Picture – graphics presets Smooth, Balanced (default), Sharp or Custom, then Frame generation (default In between) and Frame rate. Resolution and MetalFX are under Custom, with the other dials.
- Controls – controller type, Walking speed, Wait for the trigger after loading, and the game controller.
- Language (including German voices if installed).
- Play area.
The performance panel and the depth-sample switch are under Advanced.
While loading, the game shows its own loading screen: the golden map of City 17 with your way through the city, in the game's language. At the start of the game and in the prologue the screen stays black while loading. That is normal.
AVP Play 1.4.7 · Download · Report a problem / Problem melden · 🇩🇪 Deutsch · 🇬🇧 English
🇩🇪 Deutsch
- Erste Schritte
- Einrichtung
- Spiele finden und filtern
- Die Seite eines Spiels
- Spiele von Steam
- Beat Saber mit Mods
- Skyrim VR
- Minecraft
- GTA Vice City
- Aufträge
- Datenverwaltung
- Einstellungen der App
- Auf der Vision Pro
- Spielbereich (Raum vermessen)
- Steuerung und Controller
- Fernbedienung (AVP Play Remote)
- Hilfe und FAQ
- Begriffe einfach erklärt
🇬🇧 English