TinyG Hardware Information

Mike edited this page May 22, 2018 · 6 revisions

Board Dimensions and Holes

Board Dimensions for TinyG Version 8

  • Board dimensions (X,Y) 4.00"(101.6mm), 4.15"(105.41mm)
  • Holes are 4-40 - 0.120"(3.05mm) bore, 0.250"(6.35mm) clearance
  • Hole locations (X,Y)
  • 0.15", 0.15" (3.8mm, 3.8mm)
  • 3.85", 0.15" (97.8mm, 3.8mm)
  • 0.15", 4.00" (3.8mm, 101.6mm)
  • 3.85", 4.00" (97.8mm, 101.6mm)
  • Motor connector centers
  • Motor1 3.618", 3.315"
  • Motor2 3.618", 2.453"
  • Motor3 3.618", 1.604"
  • Motor4 3.618", 0.734"
  • USB connector center 0.57", 0"
  • J6 spindle/coolant connector center 0.242", 3.272"
  • J7 XY limit switch connector center 0.242", 2.319"
  • J8 ZA limit switch connector center 0.242", 1.418"

Board Dimensions for TinyG Version 7 and earlier

  • Board dimensions (X,Y) 3.75", 4.15"
  • Holes are 4-40 - 0.120" bore, 0.250" clearance
  • Hole locations (X,Y)
  • 0.15", 0.15"
  • 3.60", 0.15"
  • 0.15", 4.00"
  • 3.60", 4.00"
  • Motor connector centers
  • Motor1 3.468", 3.315"
  • Motor2 3.468", 2.453"
  • Motor3 3.468", 1.604"
  • Motor4 3.468", 0.734"
  • USB connector center 0.781", 4"
  • J11 spindle/coolant connector center 0.25", 1.08"
  • J12 reset takeoff connector center 0.25", 0.687"
  • J13 limit switch connector center 0.99", 0.14"

Motor Plugs for v7 and Earlier

This is the mating (wire) connector for the quick release motor plugs on the v7 and earlier:

Clone this wiki locally
You can’t perform that action at this time.
You signed in with another tab or window. Reload to refresh your session. You signed out in another tab or window. Reload to refresh your session.
Press h to open a hovercard with more details.