Skip to content
WacKEDmaN edited this page Oct 31, 2026 · 1 revision

Audio

All these settings are in the Audio menu and in Window → Settings → Audio settings.

Sound and volume

  • Sound enabled: all the sound on or off.
  • Volume: the master volume, 0 to 100%.

Sound sources

Each sound device has its own slider, from 0 to 200% of its own level. A right click on a slider sets 100%. A device that is not fitted keeps its level for when you fit it.

Source Device
CPC (AY) The CPC's AY-3-8912 sound chip (the PSG)
DigiBlaster / AmDrum The 8-bit DACs
Speech The SSA-1, dk'tronics speech, LambdaSpeak 3
LambdaSpeak 3 MP3 The MP3 module of the LambdaSpeak 3
SYMBiFACE III The SF3's sound card (MP3, samples, MIDI, web radio)
PlayCity The six AY channels of the PlayCity
OPL4 The OPL4 sound card

Machine noises

The sounds are recordings in the sounds folder beside the program. You can replace them with your own WAV files of the same names.

  • Disc drive sounds: the motor of the 3-inch drive, the head steps, and a disc going in and out.
  • Keyboard sounds: a click for each key pressed and released.
  • Noises: their volume.

Printer-port DAC

  • None.
  • DigiBlaster: an 8-bit DAC on the printer port (7 data lines and STROBE).
  • AmDrum: the Cheetah AmDrum, an 8-bit DAC at &FFxx.

When the printer port holds a printer (Expansions → Printer port), the DigiBlaster cannot be fitted.

Other sound devices

The PlayCity, the OPL4, the speech units and the SYMBiFACE III sound card are fitted in the Expansions menu. Refer to Expansions and SYMBiFACE II and III.

Record the sound

File → Record → Sound only (.wav)... records the sound. Refer to Recording.

Clone this wiki locally