Epoxy Process

Step 1

Tape the surfaces that you want to protect from accidental epoxy contact

Step 2

Create and hot glue a coffin surrounding the area you want to epoxy. Hot gluing will ensure the coffin stays in place and isn't pushed up by the epoxy as it cures.

Step 3

Mix equal parts of the two part epoxy mixture into a cup and stir thoroughly with disposable stirring stick (popsicle stick). Wear gloves.

Step 4

Use the stir stick to carefully apply epoxy to the inside of the coffin. Epoxy is viscous so you may need to push it around with the popsicle stick or tweezers, make sure to wash tweezers immediately if you do use them. The epoxy has about a 70 minute working time so take your time.

Step 5

Allow to cure for at least seven hours