Config 2.0 Verify Joystick Control

For this test, you will need

• Atari Computer
• FujiNet
• A joystick plugged into port 1.

Steps

1. Reset FujiNet
2. Power on Atari, wait for CONFIG.
3. Wait for Network.
4. On hosts/devices screen, press up or down on joystick. Verify this causes the host slot cursor to change.
5. Press D. Verify that selection bar is now in Device Slots.
6. Press up/down and verify that joystick changes slot selection there.
7. Press H. to return to device slots.
8. Power off.

Expected Result

• CONFIG should respond to joystick control for navigation of slots and filenames.