Testing local SD Card Storage
Thomas Cherryhomes edited this page Jul 28, 2020
·
2 revisions
- Atari Computer
- #FujiNet
- a micro SD card containing the contents of the following file: Micro SD Card ZIP, uncompressed onto it.
- Uncompress the contents of the above file onto a blank SD card, using a suitable computer.
- Insert the micro SD card into the #FujiNet.
- re-connect the #FujiNet to the Atari computer, attaching USB power.
- Power on Atari.
- Wait for CONFIG to boot, and HOSTS/DRIVES to appear.
- Edit the first host slot by pressing E.
- Change the field to SD and press RETURN.
- Press ENTER to select the host slot.
- Verify that the contents of the flash card are visible.
- Select the Atari DOS folder. The Atari DOS disk images should appear.
- Select the Atari DOS 2.0s.atr file. The mount to device slot screen should appear.
- Select the first device slot. The message should change to ask for mount as R or W, select either. The hosts/drives should re-appear.
- Press OPTION to boot.
- if READY appears, type DOS and press RETURN
- The DOS menu should appear.
- Test done, power off system.
- Atari DOS menu should load from the local SD card slot.
- The microSD Contents ZIP was updated due to corrupted DOS 2.0S image. (2020-07-27)
Copyright 2023 Contributors to the FujiNetWIFI project.
Join us on Discord: https://discord.gg/7MfFTvD
- Home
- What is FujiNet?
- The Definition of Done
- Board bring up for FujiNet Platform.IO code
- The Complete Linux cli-only install and setup guide
- Development Env for Apps
- FujiNet-Development-Guidelines
- System Quickstarts
- FujiNet Flasher
- FujiNet Configuration File: fnconfig.ini
- AppKey Registry - SIO Command $DC Open App Key
- CP-M Support
- BBS
- Official Hardware Versions
- Prototype Board Revisions
- FujiNet Development Guidelines
- Atari Programming
- Apple Programming
- C64 Programming
- ADAM Programming
- Testing Plan
- Hacker List
- FujiNet VirtualMachine