DIAGNOSTIC: Alter SIO Timing for T3

This is a command for Device $70 - The FujiNet Device itself (see SIO-Commands-for-Device-ID-$70).

Alter SIO Timing for T3 ($B3)

Description

Alters the Timing value (in microseconds) for Timing value 3.

From the Atari Hardware Manual:

  The computer generates a delay (t3) between the receipt of the 
    last bit of the ACK byte and the transmission of the first bit of 
    the data frame by the computer. 

    computer t3 (min) = 1000 microsec. 
    computer t3 (max) = 1800 microsec. 

    peripheral t3 (min> = ?? 
    peripheral t3 <max> = ?? 

Parameters

DCB	Value
DDEVIC	$70
DUNIT	$01
DCOMND	0xB3
DSTATS	0x00
DBUF	NULL
DTIMLO	0x0F
DBYT	0
DAUX	16-bit value containing # of microseconds in little-endian order

Examples

See thwap tool, for examples of how to alter this value: GitHub Link

See Also

• DIAGNOSTIC: Alter SIO Timing for T0
• DIAGNOSTIC: Alter SIO Timing for T1
• DIAGNOSTIC: Alter SIO Timing for T2
• DIAGNOSTIC: Alter SIO Timing for T4
• DIAGNOSTIC: Alter SIO Timing for T5