SIO Command $DB Close App Key
Bill Kendrick edited this page May 27, 2022
·
2 revisions
This is a command for Device $70 - The FujiNet Device itself (see SIO-Commands-for-Device-ID-$70).
Close App Key ($DB)
This command is currently not needed, but exists for possible future use. Both the Write App Key and Read App Key will immediately close the key after the command is executed.
| DCB | Value |
|---|---|
| DDEVIC | $70 |
| DUNIT | $01 |
| DCOMND | $DB |
| DSTATS | $00 |
| DBUF | 0 - not used |
| DTIMLO | 15 |
| DBYT | 0 |
| DAUX | 0 - not used |
See appkey-sample in the fujinet-apps repository.
Copyright 2023 Contributors to the FujiNetWIFI project.
Join us on Discord: https://discord.gg/7MfFTvD
- Home
- What is FujiNet?
- The Definition of Done
- Board bring up for FujiNet Platform.IO code
- The Complete Linux cli-only install and setup guide
- Development Env for Apps
- FujiNet-Development-Guidelines
- System Quickstarts
- FujiNet Flasher
- FujiNet Configuration File: fnconfig.ini
- AppKey Registry - SIO Command $DC Open App Key
- CP-M Support
- BBS
- Official Hardware Versions
- Prototype Board Revisions
- FujiNet Development Guidelines
- Atari Programming
- Apple Programming
- C64 Programming
- ADAM Programming
- Testing Plan
- Hacker List
- FujiNet VirtualMachine