DIAGNOSTIC: Alter SIO Timing for T0

This is a command for Device $70 - The FujiNet Device itself (see SIO-Commands-for-Device-ID-$70).

Alter SIO Timing for T0 ($B0)

Description

Alters the Timing value (in microseconds) for Timing value 0.

From the Atari Hardware Manual:

  The computer generates a delay (tO) between the lowering of COMMAND-  
    and the transmission of the first byte of the command frame. 

    computer tO (min) = 750 microsec. 
    computer tO (max) = 1600 microsec. 

    peripheral tO (min) = ?? 
    peripheral tO (max) = ?? 

Parameters

DCB	Value
DDEVIC	$70
DUNIT	$01
DCOMND	0xB0
DSTATS	0x00
DBUF	NULL
DTIMLO	0x0F
DBYT	0
DAUX	16-bit value containing # of microseconds in little-endian order

Examples

See thwap tool, for examples of how to alter this value: GitHub Link

See Also

• DIAGNOSTIC: Alter SIO Timing for T1
• DIAGNOSTIC: Alter SIO Timing for T2
• DIAGNOSTIC: Alter SIO Timing for T3
• DIAGNOSTIC: Alter SIO Timing for T4
• DIAGNOSTIC: Alter SIO Timing for T5