Repository navigation
SSTV Receiver
Receive Slow Scan Television pictures and browse saved images. The screenshots below are unmodified 1280 × 720 captures from COM17 on October 26, 2026, following the v0.5.0-beta.1 WebBurner installation.
A Pluto transmitter sent the existing OrcSDR Robot36 test pattern on 145.500 MHz through a cable and a 30 dB attenuator to the receiver. Programmed transmit attenuation was 60 dB. The current RF level was not measured, so this example illustrates the dashboard and received picture, not receiver sensitivity or off-air reception. Pluto was muted after transmission.
The Tune tab shows the receiver on 145.500 MHz using NFM, with RF and audio waterfalls. This capture was taken during the cabled Robot36 sample.
The Receive tab retains the last completed test picture. This capture was taken after transmission: the current status is sync analysis, not an image still being drawn.
The Images tab shows two completed Robot36 pictures, with the selected image’s frequency, completion details and SD save status. These are repeat transmissions of the same laboratory sample.
The Setup tab provides mode selection, detection options and automatic saving to SD. The visible mode buttons describe available controls; these screenshots do not qualify every listed mode.
See Screenshot Catalog for exact image hashes.